Skip to content
Qanoon Digest

Exemption from customs duty on import of raw materials, sub-components, components, sub-assemblies and assemblies, for manufacture of specified goods (Survey based).

SRO 565(I)/2006Exemptions and concessions

SRO 565(I)/2006 is a Customs SRO dated 5 June 2006, listed by FBR as "Exemption from customs duty on import of raw materials, sub-components, components, sub-assemblies and assemblies, for manufacture of specified goods (Survey based).".

The text below was extracted automatically from the text layer of the official PDF. Line breaks and table layout may differ from the original, and where FBR scanned the paper and added a machine-read text layer, that layer can contain misread characters. Check the official PDF before relying on any wording or figure.

Page 1

GOVERNMENT OF PAKISTAN MINISTRY OF FINANCE, ECONOMIC AFFAIRS, STATISTICS AND REVENUE (REVENUE DIVISION) *** Islamabad, the 5th June, 2006. NOTIFICATION (CUSTOMS) S.R.O. 565 (I)/2006.- In exercise of the powers conferred by section 19 of the Customs Act, 1969 (IV of 1969), and in suppression of Notification No. S.R.O. 565(I)/2005, dated the 6th June, 2005, the Federal Government is pleased to exempt raw materials, sub-components, components, sub-assemblies and assemblies, 29[as are not manufactured locally,] 12[Omitted], specified in column (3) of the Table below, imported for the manufacture of goods specified in column (2) of the said Table, from so much of customs-duty leviable under the First Schedule to the Customs Act, 1969 (IV of 1969), as are in excess of the rates specified in column (5) of that Table, subject to certain exclusion specified below, the special conditions as specified in column (6) of the Table and the following general conditions, namely: - (i) 24[An] importer-cum-manufacturer having suitable in-house facilities 24[and registered with the Sales Tax Department as manufacturer]shall submit a complete list in the prescribed format [appended as Form-I] of his annual requirement of permissible items (inputs) he intends to import for the manufacture of goods mentioned in column (2) of the table to the 29[Director Input Output Co-efficient Organization(IOCO)] having jurisdiction or to any other organization or person as authorized by the 12[Federal Board of Revenue]; 29(ii) the importer-cum-manufacturer shall file a request containing a declaration of input-output ratios to the Director of IOCO or the person duly authorized by him. The Director or the authorized person may accept the declaration of input-output ratio as declared by the applicant and determine the annual requirement of inputs. In case the Director or authorized person is not satisfied with declared input-output ratios of the items to be manufactured because of their being prima-facie not in accordance with the prevalent average of the relevant industry or for any other reason, he may, after allowing a reasonable provisional quantity, verify input output-ratios or through Sector Specialist of IOCO or make a reference to any other recognized authority for determination thereof. The Director or authorized person shall then determine the final annual quantitative entitlement of inputs and the applicant shall proceed to consume imported inputs in accordance with the input-output ratios and quantities so determined; (iii) the clearance of inputs shall be allowed through one port or dry port only, however, for the liquid bulk cargo imported at Karachi, the facility of clearance from either port i.e. Port Qasim and Karachi Port shall be allowed subject to maintenance of centralized record of quota debiting at the port for which the Provisional or Final Certificate is issued; (iv) the authorized officer of 24,29[Director IOCO] having jurisdiction] shall furnish all relevant information online to Customs Computerized System 24[omitted] as per Form-II appended to this notification against a specific user ID and password obtained under section 155D of the Customs Act, 1969. In 24[omitted] Collectorate/Customs stations where the 24[Customs Computerized System] is not yet operational, the Project Director or any other authorized person shall feed the requisite information 24[obtained from the 29[Director IOCO] in Customs Computerized System on daily and weekly basis]; (v) the importer-cum-manufacturer shall file Goods Declaration on the prescribed format and manner with complete details of authorization of imported inputs for clearance. The Collector of Customs on satisfaction of correct declaration shall allow clearance of imported inputs after obtaining post dated cheque for the differential amount of statutory 24[duty/ and concessionary 24[duties].

Page 2

(vi) the importer-cum-manufacturer shall maintain records of the inputs and the goods manufactured from imported inputs in such form as may be prescribed by the 12[Federal Board of Revenue] or required under any other law for the time being in force; 29(vii) the importer-cum-manufacturer shall in writing communicate to the concerned Director of IOCO about the consumption of imported items within sixty days of consumption of goods. After carrying out reconciliation by the concerned Directorate of IOCO, the clearance certificate shall be issued by the Director of IOCO or his authorized person on the basis of which the post dated cheque shall be released or cancelled by the Collector of Customs of concerned import Collectorate. In case of non-consumption of imported goods within one year from the date of import, the importer shall pay the customs-duty and other taxes involved or obtain extension for further period from the concerned Director of IOCO after giving plausible reasons for seeking extension in utilization period; (viii) 29[Director of IOCO] may,24[omitted], whenever deemed necessary get the records of the importer-cum-manufacturer audited and may also get the stocks verified. In case it is found that the inputs have not been properly accounted for or consumed for the manufacture and supply of goods as prescribed, 29[Director of IOCO shall communicate the audit findings to the concerned Collector of Customs of the import Collectorate who shall] initiate proceedings for the recovery of leviable customs-duty and other taxes besides penal action under the relevant provisions of the laws in force. (ix) The importer-cum-manufacturer may also get manufactured any of the item from the raw materials, sub-components, components, sub-assemblies or assemblies mentioned in column 3 of the Table below, to be used in manufacturing of goods mentioned in Column 2 of the Table below, from another manufacturer (vendor), duly registered with Sales Tax department, having suitable in-house facility 24[subject to approval of the Collector of Customs]. In such case, (i) the vendor shall have a firm contract with the importer-cum-manufacturer; (ii) the importer-cum-manufacturer may provide the imported raw materials, sub- components, components, sub-assemblies or assemblies mentioned in column (3) to the vendor; (iii) the vendor shall not be entitled to import the raw materials, sub-components, components, sub-assemblies or assemblies under this SRO for manufacturing of goods to be supplied to the importer-cum-manufacturer; (iv) the vendor after manufacturing the sub-components, components, sub- assemblies or assemblies supply them only to the importer-cum-manufacturer with whom he held a firm contract; and (v) the vendor shall also maintain proper record of the raw materials, sub- components, components, sub-assemblies or assemblies consumed or utilized and goods supplied to the importer-cum-manufacturer. (x) Under circumstances of exceptional nature and for reasons to be recorded in writing, the 12[Federal Board of Revenue] may relax any of the conditions, if it is satisfied that such condition is detrimental to the bonafide purposes of importer-cum-manufacturer’s business, subject to such surety or guarantee as it may deem appropriate to secure to ensure proper accountable and utilization of the imported goods: Provided the mild steel bars, mild steel rods, mild steel wire rods and plastics 24[(excluding specified in the Table below) shall not be entitled for exemption under this notification. 12[Omitted]

Page 3

Explanation 2.- The importers can simultaneously avail the statutory rate of duty on those items mentioned in the table imported as part of CKD/SKD kits which have statutory rates lower than the CKD/CBU rates under this notification. “TABLE Extent of exemption Description of raw materials, Heading or from Description of S. sub-components, Sub- customs Special goods to be No. components, sub-assemblies heading duty in conditions manufactured. and assemblies. Nos. excess of rates given below. (1) (2) (3) (4) (5) (6) 1. Air conditioners. Raw Materials A. The in-house facility for air conditioner manufacturing shall include the following: - (1) Hot stamping foil 3212.1000 10% (i) Charging machine (2) Copper tube in coils 7411.1090 10% (ii) Condenser bending machine Sub-components & (iii) Rear panel Components bending machine (1) Terminal block. 8415.9099 15% (iv) Front panel bending machine (2) Remote control. 8415.9099 15% (v) Press Machines. (3) Single phase AC motor upto 8501.4090 15% (vi) Halogen 320 watts leak detector (4) Axial fan 8414.5190 15% (vii) Shearing machines (5) Plasma filter assembly. 8415.9099 15% (viii) Tapping machines (6) Cross flow fan - indoor unit 8414.5190 15% (ix) Riveting machines (x) Spot welding machines (xi) Evaporator bending machine B. The concessions under SRO

Page 4

shall only be available to the manufacturers availing the IOR for all the Sub- components and Components provided in SRO. 2. Deep-freezers/ Raw Materials A. The in-house chest cooler. facility for deep freezer/ chest cooler manufacturing shall include the following: - (1) Hot stamping foil. 3212.1000 10% (i) Sheet Metal Shop (2) Soft PVC compound according 3904.2200 10% (ii) Paint shop to DIN 53 739 or equivalent (3) Copper tube in coils 7411.1090 10% (iii) Vacuum forming machine along with moulds (4) Polyester Coated Painted 7606.9290 10% (iv) Foaming Aluminium Sheet with machine along Protection Film in Coils with moulds, jigs and fixtures. (5) Alluminium sheet embossed or 7606.9290 10% B. The patterned concessions under SRO shall only be available to the manufacturers availing the IOR for all the Sub- components and Components provided in SRO. Sub-components & Components (1) Terminal blocks. 8418.9990 15% (2) Light switch. 8535.3010 15% (3) Lamps of a power not 8539.2200 15% exceeding 20 watts. 3. Refrigerators/ Raw Materials A. The in-house Visicoolers. facility for refrigerator/ visicooler manufacturing shall include the

Page 5

following: - (1) Hot stamping foil. 3212.1000 10% (i) Sheet Metal Shop (2) Soft PVC compound according 3904.2200 10% (ii) Paint shop to DIN 53 739 or equivalent (3) Copper tube in coils 7411.1090 10% (iii) Vacuum forming machine along with moulds Sub-components & (iv) Foaming Components machine along with moulds, jigs and fixtures. (1) Terminal blocks. 8418.9990 15% B. The concessions under SRO shall only be available to the manufacturers availing the IOR for all the Sub- components and Components provided in SRO. (2) Light switch. 8535.3010 15% (3) Lamps of a power not 8539.2200 15% exceeding 20 watts. 4. Washing Sub-components & The in-house Machines Components facility for washing machine manufacturing shall include the following: - (1) Terminal blocks. 8450.9000 15% (i) Sheet metal shop for metal body machines. (2) Single phase AC motor upto 8501.4090 15% (ii) Injection 320 watts. moulding machines along with moulds at least for the wash tub. 5. Car Air- Raw Materials Nil conditioners (1) Rubber hose (high pressure). 4009.3130 10% (2) Aluminium sections. 7604.2990 10% (3) Aluminium Foil 7607.1990 10% Sub-components & Components (1) Plastic caps. 8415.9091 15%

Page 6

(2) Blower wheel. 8415.9091 15% (3) Net Filter 8415.9091 15% (4) Belt for compressor. 4010.3110 15% (5) Bracket (Aluminum). 7616.9990 15% (6) Stay for sensor. 7616.9990 15% (7) Fan 8414.5190 15% (8) Pipes. 8415.9091 15% (9) Suction/discharge fitting assy. 8415.9091 15% (10) Distributor assy. 8415.9091 15% (11) Condenser partition 8415.9091 15% plate/separator. (12) Side plates for condensers / 8415.9091 15% evaporators. (13) AC Control Unit / Controller 8415.9091 15% AC (14) Body accumulator. 8415.9091 15% (15) Capsule for heater core. 8415.9091 15% (16) Evaporator core plate. 8415.9091 15% (17) HVAC door sub assembly. 8415.9091 15% (18) Glass sight/joint receiver. 8415.9091 15% (19) Insert for heater core. 8415.9091 15% (20) Tank header, plate and header 8415.9091 15% pipe for condensers / evaporators. (21) Tubes for condensers/ Tubes 8415.9091 15% for Evaporators/ Tubes for Heater/ M tubes. (22) Actuator. 8415.9091 15% (23) Clutch magnet for compressor 8415.9091 15% & parts. (24) Core Sub-Assy Heater 8415.9091 15% (25) O-Flex 7607.2000 15% (26) Sensor Bulb Insulator 3919.9090 15% (27) Aluminium fins/corrugated 8415.9099 15% fins. (28) Idle pully. 8483.5090 15% (29) Fuse assy. 8536.1000 15% (30) Switches. 8536.5091 15% (31) Condensers 8415.9021 20% 6. Powder Coatings. Raw Materials Nil (1) Organic and inorganic 3204.1700 10% pigments. (2) Epoxy resin. 3907.3000 10% (3) Polyester resin. 3907.9900 10% 7. Chrysotile Chrysotile Asbestose 2524.9000 10% Nil Cement Pipes, Sheets & Fittings

Page 7

8. Evaporators and Raw Materials Nil Condensers for air-conditioners, deep freezers and refrigerators and Industrial Evaporators & Condensers for Chilled Water Coils, Steam Heating Coils, Shell & Tube Type (1) Steel Galvanized Coated Sheet 7210.4190 5% (2) Copper Fin stock 7409.1100 5% (3) Copper Tubes in coils. 7411.1090 10% (4) Galvanized Steel Tube 7306.9000 10% (5) Copper tube/ pipes 7411.1090 10% (6) Aluminum Foil 7607.1990 10% 9. Air-conditioning, Raw materials Respective 10% Nil chilling, Headings humidification and industrial refrigeration plants. Sub-components and Respective 15% components Headings Modules / assemblies Respective 15% Headings 10. Alkyd resins. Raw materials. Nil (1) Crude soybean oil, whether or 1507.1000 10% not degummed. (2) Crude coconut oil. 1513.1100 10% (3) Solvent C - 9 2707.5000 10% 11. Aluminum pre- Raw Materials Nil sensitized printing plates. (1) Unbleached kraft / black 4811.5990 5% polyethne coated paper. (2) Aluminum sheet 7606.1100 5% (3) Aluminum foil. 7607.1990 5% 12. Articles of Raw Materials Nil stationery. (1) Potato starch 1108.1300 0% (2) Acid dyes whether or not 3204.1200 0% premetal lised, and preparations based thereon; mordant dyes and preparations based thereon (acid dyes / dyestuff) ), non-textile grade (3) Pigments and preparations 3204.1700 0% based thereon (pigments) ), non-textile grade

Page 8

(4) Stamping foil 3212.1000 0% (5) Inks for ball points pens, fine 3215.9010 0% liners and fibre tips (6) Edenol 3824.9099 0% (7) Hardners 3824.9099 0% (8) Acrylic polymer (fast drying) 3906.9090 0% (9) Alkyd resins (fast drying) 3907.5000 0% (10) Amino-resins (fast drying) 3909.3000 0% (11) Cellulose nitrate 3912.2010 0% (12) Carboxyl-methyl cellulose and 3912.3100 0% its salts (carboxy methyl cellulose) (13) Porous fibre rods for making 3916.9000 0% marker nibs (14) Heat transfer film 4908.9000 0% (15) Electro galvanized wire 7217.2000 0% (16) Spring wire 7217.9000 0% (17) Brass alloy wire 7408.2100 0% (18) Wood sandwich blocks with 9609.9000 0% lead encased Parts and Components. (1) Carbon for lead 2803.0090 5% (2) Steel balls not exceeding 1mm 7326.9020 5% diameter (steel balls) (3) Sharpener blades 8214.1000 5% (4) Synthetic fiber reservoirs of 9608.6000 5% the kind used in writing instruments (ink reservoirs) (5) Nibs made of special metal for 9608.9100 5% use in manufacture of writing instruments (fountain pen nibs) (6) Nibs points( for fiber tip pens 9608.9100 5% and markers) (7) Tips for fineliners 9608.9100 5% (8) Raw cores used for making 9609.2010 5% black lead (9) Color lead 9609.9000 5% 13. Artificial leather (1) Polyurethene resin. 3208.9090 10% Nil industry (2) Release paper. 4811.5990 10% 14. Bolts, nuts, (1) Brass wire. 7408.2100 10% Nil screws, concrete nails and blind rivets. (2) Aluminum wire. 7605.1900 10% (3) Aluminum Alloy Wire 7605.2900 10% 15. Cables and Raw Materials Nil Conductors. (1) Pigments. 3204.1700 10% (2) Coloring ink. 3215.9090 10% (3) Wire drawing lubricant. 3403.1990 10%

Page 9

(4) Polyethylene compound (cable 3907.6090 10% grade). (5) Polybutylene b trephthalate 3907.7000 10% (mbt). (6) Fiber Reinforced 3916.9000 10% Polypropylene / Glass Reinforced Polypropylene. (7) Core covering tape. 3920.1000 10% (8) Identification tape, PP 3921.1900 10% Film/Filler/Tape (9) Malinex Tape, P.P. Film, 3921.1900 10% Polypropylene Tape (10) Insulating paper. 4804.2900 10% (11) Emulsion Filter Paper 5603.1200 10% (12) Binder yarn. 5607.4100 10% (13) Binder tape. 5607.4100 10% (14) Polypropylene Filler/ Twin 5607.4900 10% Yarn (15) Semi conducting Nylon / 5906.9900 10% Rubber insulation tape. (16) Semi conducting tape. 5906.9900 10% (17) Copper covered steel wire. 7217.3090 10% (18) Aluminum strip. 7606.9290 10% (19) Aluminium foil strip (both 7607.2000 10% sides PE laminated). (20) Single / Multi mode optical 9001.1000 10% fiber (ITU-T G-652, ITU-T G- 651 & ITU-T G-655). 16. Composite roll- Raw Materials Nil formed window and doors (1) Electro galvanized coils 7210.3010 15% 7210.4910 15% 7210.7020 15% Component (1) Float glass 7005.1000 20% 7005.2100 20% 17. Defense stores, Raw materials Respective 10% Under the machinery and Headings certificate from equipment the Director manufactured for General the use of defense Defense forces. Production, Ministry of Defense, Government of Pakistan. Sub-components and Respective 15% components. Headings 18. Diapers and Raw Materials Nil Sanitary Napkins.

Page 10

(1) Adhesives based on polymers 3506.9190 10% or rubbers. (2) Hot melt adhesive. 3506.9190 10% (3) Pre-Laminated Tape 3919.1090 10% (4) Frontal Tape 3919.9090 10% (5) PE + NW laminate sheet. 3920.1000 10% (6) Poly back sheet. 3920.1000 10% 3920.9900 10% (7) Frontal tape. 3920.9900 10% (8) Pre laminated tape. 3920.9900 10% (9) Perforated poly film. 3920.9900 10% (10) Waist Band Barrier 3921.9090 10% (11) Toilet or facial tissue stock, 4803.0000 10% towel or napkin paper of a kind used for household or sanitary purpose (non-porous). (12) Siliconised paper. 4810.9900 10% (13) Non-wovens, whether or not 5603.1100 10% impregnated, coated, covered or laminated of man made filaments. 5603.1200 10% (14) Acquisition Layer 5603.9200 10% (15) Loop pile fabric. 6001.2210 10% 6001.2290 10% 19. Diesel generating Raw Materials Nil Sets. (1) Insulating varnish class f 3208.9011 5% insulation. (2) Impregnating resin. 3907.7000 5% (3) Laminated polyester paper 4807.0000 5% sheets/strips for electric insulation 0.20mm to 0.50 mm thick. (4) Insulating glass sleeve 7019.9010 5% (round/flat ) 1.5mm to 20mm dia. (5) Resiglass insulating tape 0.3 x 7019.9090 5% 20mm. (6) Flat Enamel copper wire. 8544.1190 5% (7) Electric cables rubber /silicon 8544.6000 5% insulated, 0.50mm2 to 150mm2. (8) Insulating varnish class H 3208.9020 5% insulation. Sub-components & Components (1) Flexible exhaust extension 7307.9900 10% pipe type nsn6115-17-044- 3839 cut to size. (2) Steel keys. 7318.2900 10% (3) Diesel Engines above 65 HP. 8408.9000 10%

Page 11

(4) Flexible Coupling 8483.6099 10% (5) Condensers 2x0.027 mf. 8503.0090 10% (6) Rotor for generator. 8503.0090 10% (7) Terminals. 8503.0090 10% (8) Transformer current/ voltage 8504.3100 10% 20/5a-200/5a-30va. 100/5a- 200/5a and 380v-415v 300- 500/5a 600-1600/5a. (9) Chokes 110v - 415 v. 8504.9090 10% (10) Capacitors / condensers 4mkv- 8532.9090 10% 20mkv 1000-660v. (11) Selector switch. 8536.5099 10% (12) Plugs and socket upto 250v / 8536.6990 10% upto 250a. (13) Contactors 3.2a- 250a / 24- 8536.9090 10% 415v. (14) Fuse base/ caps / adapters / 8536.9090 10% fuse collar. (15) Screw safety insert 35 to 8536.9090 10% 150amps. 20. Disposable/Auto (A) Disposable/Auto Disable Nil Disable Syringes Syringes (1) Epoxy bond. 3506.1000 5% (2) PVC (medical grade). 3904.2200 5% (3) Plastic film (medical grade). 3920.2040 5% 3921.9090 5% (4) PVC gaskets. 3923.5000 5% (5) Rubber gaskets. 4016.9310 5% (6) Bulk Needles without plastic 9018.3200 5% Hub and Cover (B) I.V Cannula. (1) Teflon Tubes 3917.2100 5% (2) Blister Paper 4802.6990 5% (3) Membrane Filter Paper 4823.2000 5% (4) Needles 9018.3200 5% (C) Disposable Infusion Giving Sets. (1) PVC Medical Grade (Non- 3904.2200 5% Toxic) (2) Latex Tube 4006.9000 5% (3) Bulk Needles without plastic 9018.3200 5% Hub and Cover 21. Dry Battery Cells. Raw Materials Nil (1) Acetylene black. 2803.0020 5% (2) Electrolytic paper. 4811.9000 5% 22. Pigment and Dyes Raw Materials Nil stuff, Textile and Tanning Chemical Auxiliaries of headings 32.04, 34.03 and 38.09. (1) Hydrocarbon Solvent 2707.5000 15%

Page 12

(2) Hydrocarbon Solvent 2710.1999 15% (3) Carbon Black 2803.0090 15% (4) Wetting Agent (ARW) 3402.1190 15% (5) Sodium Lauryl Sulfate 3402.1190 15% (6) Dispersants 3402.1300 15% (7) Non-ionic Surface Active 3402.1300 15% Agents 23. Electrical Raw Materials Nil Capacitors (1) Epoxy Resin 3907.3000 10% (2) Polyurethane Resin 3907.3000 10% (3) BOPP Film (Plain capacitor 3920.2010 10% grade) (4) BOPP Film (Metalized 3920.2030 10% capacitor grade) (5) Polyester / Polypropylene seal 3920.2090 10% Film (6) Insulating Paper 4823.9090 10% (7) Aluminum Foil (99.9% purity 7607.1100 10% electrolytic grade, plain and etched) Sub-components & Components (1) Silicon Rubber Seals 4016.9320 15% (2) Supporting Kernels 8532.9090 15% (3) Insulating Cover Sleeve 8546.9000 15% 24. Industrial Raw Materials Nil Switchgears & High Voltage Electrical Switches (1) Dyes 3204.1700 10% (2) Heat Resistant Cable upto 8544.4990 10% 1000V (3) Poly Carbonate Sheets 3920.6100 10% Sub-components & Components (1) Cable Marking Strip 3926.9099 15% (2) Self Clunching Stud 7318.1690 15% (3) Transformers upto 1 KVA 8504.3100 15% (4) H.T. Current Transformers 8504.3200 15% exceeding 2500A & 25 kV/3 Sec Isc. (5) H.T. Capacitors exceeding 8532.2900 15% 1000 V (6) H.T.Fuses (above 1000V) 8535.1000 15% (7) Switches (not domestic) 8535.3010 15% 8536.5099 15% (8) Lightening Arrestors 8535.4010 15% (9) Fuses 8536.1000 15% (10) HRC Fuses (Industrial) 8536.1000 15%

Page 13

(11) Automatic Circuit Breakers, 8536.2090 15% Pole 1, 2 & 3 upto 10A (12) Industrial Plugs and Sockets 8536.6990 15% (13) Capacitor Trip Units 8536.9090 15% (14) Contactors/Thyristors/Transdu 8536.9090 15% cers (15) Control Unit 8536.9090 15% (16) Combined Electronic Meter 9028.3000 15% (17) Thermostat for Industrial 9032.1090 15% Switch Gears (18) Bulbs upto 20 watts 8539.2990 15% 25. Footwear. Raw Materials Nil (1) Masterbatch. 3204.1700 10% (2) PU paints. 3208.9090 10% (3) Bayderm Sealer SL-01 3208.9090 10% (4) Release agents. 3403.1990 10% (5) Wax cream. 3405.1010 10% (6) Shoe adhesives. 3506.9110 10% (7) Cutting Boards 3920.5900 10% (8) Toe puff material. 3921.9090 10% (9) Shoe Lasts (Plastic) 3926.9060 10% (10) Fibre board. 4411.9400 10% (11) Insole board. 4811.5990 10% (12) Non-woven lining material 56.03 10% (13) Combralla lining material. 5603.1300 10% (14) Shoe reinforcement tapes. 5906.1000 10% (15) Mesh material 6002.4000 10% (16) Parts of footwear of other 6406.9000 10% materials 26. High Pressure Raw Materials The import of Laminate Saturating kraft (Formica) and paper is allowed Low Pressure for High Laminates. Pressure Laminate (Formica) only. (1) Printed decorative paper 4811.9000 10% (2) Plain decorative paper 4805.9190 10% (3) Saturating kraft paper 4804.3100 10% 27. Manufacture or Raw Materials Nil formulation of Agricultural pesticides by manufacturers or formulators duly recognized and approved by the Ministry of National Food Security and Research.

Page 14

(i) Oils and other products of 2707.5000 5% distillation of high temperature, coal-tar and similar products in which the weight of the aromatic constituents exceeds that of non-aromatic constituents. 2707.9100 5% 2707.9990 5% 2710.9900 5% (ii) Following active ingredients for pesticides registered by the Department of Plant Protection under the Agricultural Pesticides Ordinance, 1971(II of 1971), stabilizers, emulsifiers and solvents: - (1) Xylol (xylenes) 2707.3000 0% (2) Solvent C-9 2707.5000 0% (3) - Beta Pinene / Agrotin 527 / 2902.1990 0% Terpenic derivative (4) Toluene 2902.3000 0% (5) Mixed xylene isomers 2902.4400 0% (6) Naphthalene 2902.9010 0% (7) Ingredients for pesticides 2903.3960 0% (8) Cadusafos Technical Material 2903.3960 0% (9) Methanol (methyl alcohol) 2905.1100 0% (10) Propylene glycol (propane-1, 2905.3200 0% 2-diol) (11) Adhesives Polyvinyl Acetate, 2905.4900 0% Polyvinyl Alcohol (12) Ingredients for pesticides 2906.2910 0% (13) Other Ingredients for 2906.2990 0% pesticides (14) Solvenon MP / 1-Methoxy 2- 2909.4910 0% Propanol, Methyglycol Acetate (15) Methanal (formaldehyde) 2912.1100 0% (16) Cyclo-hexanone and methyl- 2914.2200 0% cyclo-hexanones (17) Cyclohexanon, Cyclohexanone 2914.2990 0% Mixed petroleum Xylene (1,2 & 1,3 & 1,4 dimethyl benzene and ethyle benzene) (18) Acetic anhydride 2915.2400 0% (19) Ingredients for pesticides 2916.3920 0% (20) Dioctyl orthophthalates 2917.3200 0% (21) Ingredients for pesticides 2918.9910 0% (22) Ingredients for pesticides 2919.9010 0% (23) Other Ingredients for 2919.9090 0% pesticides

Page 15

(24) Endosulfan Technical Material 2920.9020 0% (25) Other Ingredients for 2920.9090 0% pesticides (26) Diethylamine and its salts 2921.1990 0% (27) Ingredients for pesticides 2921.4310 0% (28) Other Ingredients for 2921.4390 0% pesticides (29) Ingredients for pesticides 2921.5110 0% (30) Triethanolamine and its salts 2922.1390 0% (31) Ingredients for pesticides 2924.2950 0% (32) Methidathion Technical 2924.2950 0% (33) Other Ingredients for 2924.2990 0% pesticides (34) Lufenuron Technical 2924.2990 0% (35) Alpha cyano, 3-phenoxybenzyl 2926.9010 0% (-) cis, trans 3-(2,2-diclord vinyl) 2,2 dimethyl cyclopropane carboxylate (36) (S) Alpha cyano, 3- 2926.9020 0% phenoxybenzyl (S)-2-(4, chloro phenyl)-3 mehtyl butyrate (37) Cyano, 3-phenony benzyl 2926.9030 0% 2,2,3,3 tetra methyl cyclopropane carboxalate (38) Cypermethrin, Alpha 2926.9050 0% Cypermethrin, Beta- Cypermethrin, Zeta- Cypermethrin, Lambda Cylalothrin, Deltamethrin, Fenpropathrin, Esfenvalerate, Bifenthrin Technical Material- Acetamiprid, Imidacloprid Technical Material- Monomehypo, Chlorothalonil Technical Material- Bromoxynil Technical Material (39) Other nitrite compounds- 2926.9090 0% Cyfluthrin, Beta Cyfluthrin Technical Material (40) 2-N, N-Dimethyl amino-I 2930.2010 0% sodium thiosulphate, 3- thiosulfourropane (41) S-S (2 dimethyl amino 2930.2020 0% (trimethylene) bis (thio carbamate) (42) Ingredients for pesticides 2930.2030 0% (43) 2- N,N-dimethyamino 1,3 2930.9010 0% disodium thiosulphate propane (44) O,S-dimethyl 2930.9020 0% phosphoramidothioate

Page 16

(45) Diafethiuran technical 2930.9030 0% (itertbutyl) 3-2-6 disopropyl (4-phenoxyphenyl) thiourene (46) O-O diethyl O-(3,5,6 trichloro 2930.9040 0% pyridinyl) phosphorothioate (47) O-(4-bromo, 2-chloro phenyl) 2930.9050 0% o-ethyl s-propyl (phosphorothioate) (48) O,O duethyl O-(3,5,6-trichloro 2930.9060 0% 2-pyridyl) phosphorothioate (49) Ingredients for pesticides 2930.9070 0% (50) Other orgonosulpher 2930.9099 0% compounds - Ethion, Methamidophos Technical Material - Dimethysulfoxid (51) Other Ingredients for 2930.9099 0% pesticides (52) Other Ingredients for 2930.9099 0% pesticides (53) Ingredients for pesticides 2931.9040 0% (54) Other Ingredients for 2931.9090 0% pesticides (55) Ingredients for pesticides 2932.1900 0% (56) 2,3 Dihydro 2-2 dimethyl-7 2932.9910 0% benzo furanyl methyl- carbamate (57) Other ingredients for 2932.9990 0% pesticides - Carbosulfan Technical Material (58) Ingredients for pesticides 2932.2030 0% (59) Other Ingredients for 2933.3990 0% pesticides (60) - Chlorpyrifos, Triazophos, 2933.5950 0% Diazinon Technical Material (61) Pyrimethanine 2933.6910 0% (62) Ingredients for pesticides 2933.6940 0% (63) - Atrazine Technical Material 2933.6990 0% (64) Isatin (lactam of istic acid) 2933.7910 0% (65) 1-Vinyl-2-pyrrol-idone 2933.7920 0% (66) - Triazophos Technical 2933.9910 0% Material (67) Penconazole Technical 2933.9990 0% (68) Ingredients for pesticides 2934.1010 0% (69) Ingredients for pesticides 2934.9920 0% (70) Difenoconazole Technical 2934.9920 0% (71) -Methyl benzimidazol - 2 - 2938.9010 0% ylcarbamate. (72) Ingredients for pesticides 2939.9910 0% (73) - Abamectin 2941.9070 0% (74) Sulphonic acid (Soft) 3402.1110 0%

Page 17

(75) Other surface active agents 3402.1190 0% (76) Catonic 3402.1290 0% (77) Non ionic surface active agents 3402.1300 0% (78) Other organic surface active 3402.1990 0% agents and preparation 3402.9000 0% (79) Chemical preparations 3824.9099 0% (iii) Following raw materials for manufacture of Technical Grade Emamectin Benzoate (registered by the Department of Plant Protection under the Agricultural Pesticides Ordinance, 1971):- (1) Ethyl alcohol 2207.1000 10% (2) Phosphoric acid (H3P04) 2809.2010 0% (3) Sodium borohydride (NaBHB) 2850.0000 0% (4) Dichoromethane (methylene 2903.1200 0% chloride) (5) Isopropyl acetate 2915.3990 0% (6) Trifluroacetic Acid 2915.9000 0% (7) Allylchloroformate (Esters of 2916.1200 0% Acrylic Acid) (8) Benzoic Acid 2916.3110 0% (9) Phenyl Dichlorophosphate 2920.9090 0% (10) Tetramethylethylene Diamine 2921.2990 0% (11) Heptamethyl disilazane 2921.2990 0% (12) Dimethyl Sulfoxide 2930.9099 0% (13) 1-methyl propyl-25-1- 2932.1900 0% methylavermectin (14) Palladium 3815.9000 0% 28. Master Batches Pigments, Dyes, Additives, Nil Fillers, Resins. (1) Carbon Black 2803.0090 10% (2) Dispersing agent. 2905.4400 10% 2905.4500 10% (3) Acids Dyes and Preparation 3204.1200 10% (4) Pigments and Preparations 3204.1700 10% (5) Brightening Agent 3204.2000 10% (6) Other Pigments. 3206.2090 10% (7) Ultramarine. 3206.4100 10% (8) Lithophone. 3206.4210 10% (9) Aluminium Paste & powder. 3212.9010 10% (10) Non-Ionic surface active agent. 3402.1300 10% (11) Other surface active agent. 3402.1990 10% (12) Other Polyacetals. 3907.7000 10% (13) Collodium wool (NC). 3912.2090 10% 29. Metallic Yarn / Raw Materials Nil Powder (1) Epoxy amino resin 3907.3000 10%

Page 18

(2) Un-coated polyester film 3920.6200 10% (3) Aluminium wire 7605.1900 10% 30. Stearic Acid/ Raw Materials Nil Distilled Fatty Acid (DFA) (1) Palm Stearin. 1511.9010 10% (2) Inedible Animal Or Vegetable 1518.0000 15% Oil and Fats 31. Printing ink. Raw Materials Nil (1) Carbon Black 2803.0090 10% (2) Driers. 3211.0090 15% (3) Alkyd Resin 3907.5000 15% (4) Nitrocellulose 3912.2010 15% (5) Resins. 3912.2090 15% 32. Seamless pipes. Raw Materials (1) Lubricating anti-rust and anti- 3824.9099 5% corrosion preparation. (2) Special steel round bars and 7214.9990 5% rods of non- alloy steel exceeding diameters 75 mm 33. Toilet Soap (1) Surface active agents. 34.02 15% Nil Industry 34. (1) Sugar Mill. Raw materials, Respective 5% Supplies to the Sub-components and Headings export sector Components. (PCT headings of such inputs including raw materials and other articles as indicated by the IOCO) or to exempt industrial units, projects, and agencies or imported by recognized local manufacturers of Heavy Engineering Goods. (2) Cement plant. (3) Plants for the production of industrial chemicals. (4) Thermal power plant. (5) Hydel Power Plant.

Page 19

(6) Fertilizer plants. (7) Heat exchangers, pressure vessels, Coloumns, filters, production separators, coolers and boilers, Bundle of Heat Exchanger, Economizer / Deaerator / Storage Tanks / Silencer, Heat Recovery Steam Generator HRSG, Heater / Flaker. (8) Machinery for the manufacture of surgical goods, sports goods and stuffed toys. (9) Machinery supplied to the approved manufacturers / assemblers of vehicles, capital goods, electronics equipment and system, consumer durable items and auto parts. (10) Marble processing industry. (11) Steel pipes/tubes industry. (12) Machinery and capital goods or engineering goods meant for export. (13) Textile machinery.

Page 20

(14) Certain types of oil and gas development plants. (15) Machinery, Supplies to equipment, electric power intermediary or generation i.e. capital goods and oil, gas, hydel, specialized coal, wind and vehicles (4 x 4 wave energy non luxury) projects, their excluding expansion or passenger modernization, vehicles. including under construction projects, and captive power projects. (16) Machinery, Supplies against equipment, international vehicles and tender to the intermediary or projects capital goods. financed out of international loan or aid giving agencies. (17) Any other Nil industrial plant recommended and approved by FBR. 35. Tyres and tubes. Raw Materials (1) Phenolic Resin 3909.4000 5% (2) Bead Wire. 7217.3010 5% 36. Tufted carpets. Raw Materials Nil (1) Woven Fabrics of Synthetic 5407.2000 10% Filament Yarn. (2) Felt backing. 5603.9300 10% 37. Television sets. CKD kits for assembly and The in-house Under EEPAS manufacture of TV sets, facility for comprising of following:- television sets manufacturing shall include the following:- (1) Rubber tube (cut to size). 4009.1190 10% (i) Mounting belt (2) Screws. 7318.2290 10% (ii) Soldering machine (3) Fly back transformer. 8504.3100 10% (iii) Jigs for technicians (4) Coil. 8504.5000 10% (iv) White balance adjuster (5) Speaker. 8518.2200 10% (v) Cross Hatch Pattern

Page 21

Generator (6) Core. 8528.7290 10% (vi) Red Pattern Generator (7) Transmitter r/c. 8529.1090 10% (vii) Microscope for Purity Adjustment. (8) Resonator 8529.9090 10% (9) Filter. 8532.2900 10% (10) Capacitor. 8532.3090 10% (11) Board, PCB. 8534.0000 10% (12) Fuses. 8536.1000 10% (13) Switch. 8536.5099 10% (14) Holder 8536.6100 10% (15) Connector 8536.9090 10% (16) Inductor exil lead, wire, cord, 8544.4290 10% cable assembly, lead set, lead wire. (17) Adopter, Adhesive tube, Ana 8529.9090 10% band tube, Antenna, Back cover, Band, Base, Bracket, Button, CA mask, Cap, Case, Chassis Assembly, Cover Dom, Cover Mini, Cover shield, Cover speaker, Clip plug, Clamps, Cover tuner, CPM, CPT earth, Crystal, Cushion, Decoration, Delay line insulator, Flux, Focus pack, Frame, Fixture, Handle, Heat sink, Hook, Inductors, Jack, Led, Leg, Lens, Link, Magnet, Mark, Mirror, Nuts, Panel-Metal, Piece, Pin, Plate, Plate compensation, Preamp, Sheet mechanism, Shield, Silicon, Socket IC, Socket Speaker Gap, Speaker grill, Speaker tweeter tape, Spring, Stopper, Supporter, Tie, Tuner, Varistor, Washer, Wedge, Window, Window A/B, Wafer, Wax, Wrap. 38. Under EEPAS. (i) Raw materials, sub- Respective 10% Nil Cellular mobile components, components for headings phones; Laser the electronic apparatus. video disc players; DVD player, VCD player; VCP (Video Cassette Player); VCR (Video Cassette Recorder);

Page 22

Compact disc player; Stereo car cassettes players; Hi-fi system; Pocket size cassette player; CD players; Radio-cum- cassette player; Radio; Electronic calculator; Microwave ovens; Caller Line Identification (CLI) apparatus, Plasma T.V sets/LCD Panel sets / LED Panel sets. (ii) SKD Kits For Assembly Of (i) The Microwave Ovens, VCP, imported SKD VCR, VCD, DVD Apparatus kits would not And Plasma T.V. Sets/LCD contain packing Panel Sets / Light Emitting materials, carton Diode (LED) Panel sets Under boxes, “Emerging Electronics brochures and Products Assembly Scheme” the printed (EEPAS). materials. (a) Microwave Oven. (1) Screw set. 7318.1400 15% (2) Power supply assy. 8504.5000 15% (3) Lamp. 8539.2200 15% (b) Car Cassette/Compact Disc Player. (1) Screw sets. 7318.1400 15% (2) Transformer. 8504.3100 15% (3) Speaker with box. 8518.2200 15% (4) Accessories. 8529.9090 15% (5) Braket. 8529.9090 15% (6) Rear cover assy. 8529.9090 15% (7) Main frame or chassis with top 8529.9090 15% cover. (8) Nobs and buttons. 8529.9090 15% (9) Front panel assy with mounted 8529.9090 15% circuit board. (10) Mechanism assy with motor 8529.9090 15% and head. (11) Cable with connector. 8544.4290 15% (c) HI Fi System (1) Screw sets. 7318.1400 15% (2) Transformer. 8504.3100 15% (3) Speaker with box. 8518.2200 15% (4) Accessories. 8529.9090 15%

Page 23

(5) Braket. 8529.9090 15% (6) Rear cover assy. 8529.9090 15% (7) Main frame or chassis with top 8529.9090 15% cover. (8) Nobs and buttons. 8529.9090 15% (9) Front panel assy with mounted 8529.9090 15% circuit board. (10) Mechanism assy with motor 8529.9090 15% and head. (11) Cable with connector. 8544.4290 15% (d) Stereo Cassette/Stereo Car Cassette Player. (1) Screw sets. 7318.1400 15% (2) Transformer. 8504.3100 15% (3) Speaker with box. 8518.2200 15% (4) Cable with connector. 8544.4290 15% (e) Radio Cassette Player. (1) Screw sets. 7318.1400 15% (2) Transformer. 8504.3100 15% (3) Speaker with box. 8518.2200 15% (4) Accessories. 8529.9090 15% (5) Braket. 8529.9090 15% (6) Rear cover assy. 8529.9090 15% (7) Main frame or chassis with top 8529.9090 15% cover. (8) Nobs and buttons. 8529.9090 15% (9) Front panel assy with mounted 8529.9090 15% circuit board. (10) Mechanism assy with motor 8529.9090 15% and head. (11) Cable with connector. 8544.4290 15% (f) Pocket Size Cassette Player. (1) Screw sets. 7318.1400 15% (2) Transformer. 8504.3100 15% (3) Speaker with box. 8518.2200 15% (4) Cable with connector. 8544.4290 15% (g) DVD / VCD Player. (1) Screw sets. 7318.1400 15% (2) Transformer. 8504.3100 15% (3) Inner connector. 8536.9090 15% (4) Outside connector (AC, AV, 8536.9090 15% RF cable). (h) Plasma Display Panel (PDP) / Liquid Crystal Display (LCD) Panel / Light Emitting Diode (LED) Panel. (1) Screw sets. 7318.1400 10% (2) Speaker. 8518.2200 10% (3) Front cabinet assy. 8529.9090 10%

Page 24

(4) Filter for plasma display or 8529.9090 10% LCD panel or LED panel (5) Rear cover assy. 8529.9090 10% (6) Plasma display or LCD or 8529.9090 10% LED control unit. (7) Plasma display panel / LCD 8529.9090 10% panel / LED panel (8) Printed circuit board. 8534.0000 10% (9) AC cable accessories. 8544.4290 10% (hi) Plasma Display Panel (PDP) / Liquid Crystal Display (LCD) Panel / Light Emitting Diode (LED) Panel (1) Screw sets 7318.1400 10% (2) Speaker 8518.2200 10% (3) Adopter / power supply 8544.4290 10% (4) Rear cover assy 8529.9090 10% (5) Plasma display or LCD or 8529.9090 10% LED control unit (6) Compact panel PDP / LCD / 8529.9090 10% LED (7) Printed circuit board 8534.0000 10% (8) Connecting cables / 8544.4290 10% accessories (i) Car Audio System (1) DC cord. 8529.9090 15% (2) Housing. 8529.9090 15% (3) Top plate. 8529.9090 15% (4) Chassis (bottom plate). 8529.9090 15% (5) Cassette/CD/MP3/MP4 8529.9090 15% mechanism assy. (6) Front sub-panel. 8529.9090 15% (7) Front panel assy. 8529.9090 15% (8) Front panel cover. 8529.9090 15% (9) Insulating sheet. 8529.9090 15% (10) Heat sink. 8529.9090 15% (11) Heat sink spacer. 8529.9090 15% (12) Misc. Hardware. 8529.9090 15% (13) PC board. 8534.0000 15% 39. Welded Steel Raw materials, sub- Nil Pipes component and components. (1) Welding flux. 3810.9000 10% (2) Welding wire. 7217.9000 10% (3) Coated electrodes of base 8311.1000 10% metal. 40. Wire rope, Wire (1) High carbon (high tensile) 7227.9000 10% Nil (High Tensile), steel wire rod / Alloy steel High Carbon and wire rod. pre-stressed concrete wire/ strands, Core wire for ACSR spring

Page 25

wires. 41. Cold Rolled Coils (1) Hot rolled coils / sheets in 72.08 5% If imported by (CRC) or G.I prime quality. sales tax sheet / coils. registered manufacturers of CRC / G.I sheets or coils. 42. Milk Chillers. Parts and Components Respective 5% Nil headings 43. Agriculture Diesel (1) Balancing block. 8409.9999 5% Nil Engines (Single Cylinder of 3-36 HP) (2) Cover sets. 8409.9999 5% (3) Cylinder block. 8409.9999 5% (4) Cylinder head. 8409.9999 5% (5) Cylinder head cover. 8409.9999 5% (6) Cylinder liner 8409.9999 5% (7) Fly-weight assy. 8409.9999 5% (8) Intake/exhaust valve & spring. 8409.9999 5% (9) Piston 8409.9999 5% (10) Piston ring set 8409.9999 5% (11) Valve rocker arm assy. 8409.9999 5% (12) Fuel Injection pump. 8413.3090 15% (13) Fuel injector. 8413.3090 15% (14) Oil pump. 8413.8190 15% (15) Water pump. 8413.8190 15% (16) Camshaft. 8483.1090 15% (17) Crank shaft. 8483.1090 15% (18) Connecting rod bearing set. 8483.3010 15% (19) Main bearing set. 8483.3010 15% (20) Set of bushing. 8483.3010 15% (21) Gear sets. 8483.4090 15% 44. Aluminum Raw materials. Nil Processing Industry. (1) Catalyst SP-561 3814.0000 15% (2) Coreactant-F 3907.7000 15% (3) Ethyl Acetate 2915.3100 15% (4) Foil Lacquer FL 65105A 3208.9090 15% (5) Hardener 3208.9090 15% (6) M.G Sulphite Tissue & Poster 4802.5400 15% paper from 22 to 40 gsm) (7) Terraflex-T 3209.9090 15% (8) NC Combi Foil Lacquer 3208.9090 10% (9) Inner Liner Coating Gold / 3208.9090 10% Transparent

Page 26

45. Fans. (1) Insulation Varnish 3208.1010 10% Nil (Polyurithene / Polyester / Polyesterimide with Baking Temperature Ranging from 100C to 220C) (2) Composite paper and 4807.0000 10% paperboard (made by sticking flat layers of paper or paperboard together with an adhesive), not surface- coated or impregnated, whether or not internally reinforced, in rolls or sheets. (3) Paper & Paper Board 4811.4900 10% Cellusose Wadding & Webs of Cullulose Fibers, Cated, Impregnated Covered Surface (4) Non Grain Oriented Electrical 7225.1900 0% Steel Sheet 7226.1900 5% 46. Recordable Discs Raw materials. Nil (CD- R/DVDR/ DVDR-DL (DUAL LAYER)/CD& DVD (1) Lacquer for CDR/CD 3208.9090 5% (2) UV bonder for DVDR/DVDR- 3506.9990 5% DL / DVD (3) Aluminium Target for 7616.9990 5% CD/DVD (4) Stampers 8523.8090 5% 47. Electronic Meters. Components Nil (1) Rubber Key Pad 4008.2990 15% (2) Current Transformer, Flyback 8504.3100 15% Transformer (3) Capacitor 8532.2900 15% (4) Connector, MOV's / Varistors 8536.9090 15% (5) Ferrite Core 9028.9020 15% 48. Liquid Food Raw materials. Nil Processing Industry for dairy and juices. (1) Folding carton 4811.4900 10% 4819.2000 10% (2) Aluminum foil 7607.2000 10% 49. Liquid Food Raw materials. Nil Packaging Industry for dairy and juices. (1) Bleached Kraft Paper (70 gsm) 4804.3900 10% gsm Tolerance (Min 67 / Max 76)

Page 27

(2) Uncoated duplex liquid 4804.4900 10% packaging board (150mN / 213 gsm) mN Tolerance (Min 112 / Max 188) gsm Tolerance (Min 205 / Max 227), (260mN / 252 gsm) mN Tolerance (Min 215 / Max 305) gsm Tolerance (Min 232 / Max 262) 4804.5900 10% 4805.9290 10% 4805.9390 10% (3) Clay coated Board (150 4810.9200 10% mN/229 gsm)mN Tolerance (Min 120/ Max 180) gsm Tolerance (Min 221 / Max 241, (260 mN /268 gsm) mN Tolerance (Min 215 / Max 305)gsm Tolerance (Min 258/Max 283) 4810.9900 10% (4) Aluminum foil plain (in rolls 7607.1100 10% of 6.3 micron thickness) Thickness Tolerance (Min 5.85 / Max 6.75) 50. Flexible (1) Aluminum Foil 7607.1100 10% Nil Packaging Laminates Industries excluding Cigarettes Industries 51. Spark Plugs (1) Metal Shells 7304.9000 5% Nil (2) Porcelain Insulator 8546.2000 5% 52. Gypsum Board Raw materials. Nil (1) Starch 3505.1090 10% (2) Glue. Adhesives based on 3506.9190 10% polymers or rubbers (3) Embossed PVC Sheets/ PVC 3918.1000 10% Lamination Foil (4) Plaster/ Gypsum Board Paper 4805.9290 10% 53. Acrylic/Pigment Raw materials. Nil Thickener (1) Additives 3404.9090 5% 3824.9099 5% (2) Organic Pigments (Non- 3204.1700 5% Textile Grade) (3) Dispersants 3402.1300 5% (4) Emulsifier 3402.1300 5% (5) Casein 3501.1000 5% (6) Cross Linker 3809.9190 5% 54. Gum Base (1) Talcum (Food Grade) 2526.2000 5% Nil

Page 28

(2) Paraffin Wax (Food Grade) 2712.2000 5% (3) Micro Wax (Food Grade) 2712.9090 5% (4) Glycerol Mono Stearate (Food 3404.9090 5% Grade) (5) Acetic Acid Ester (Food 3824.9099 5% Grade) (6) PVA (Poly Vinyl Acetate) 3905.1900 5% (Food Grade) 55. Polystyrenes Nil (HIPS, EPS & GPPS) (1) Pentene 2710.1290 10% (2) Liquid Paraffin 2710.1995 10% (3) Uvitex-ob (brightener) 3204.2000 10% 56. Shoe Adhesive Nil (1) Solvent Oil 2710.1250 5% (2) Para tertio butyl phenolic resin 3909.4000 5% 57. Linear Alkyl (1) Linear Alkyl Benzene 3817.0000 0% Nil Benzene Sulphonic Acid. 58. Electrolytic Tin (1) Tin Mill Black Plate (of 7209.1810 15% Nil Plate. secondary quality) 59. Butyl Acetate (1) Sabutol 3814.0000 10% Nil. 2. This notification shall come into force on 6th June, 2006. FORM-I [See clause(i)] (To be filled in by the importer or any person or persons duly authorized by him form his organization) Name & address of the NTN/FTN Importer Port of clearance Clearing Agents Name/No. S.No. H.S. Description Specifications of Applicable rate of Quantity Unit value Unit of Total value Code imported inputs duty measure in Pak Rupees (1) (2) (3) (4) (5) (6) (7) (8) (9) CERTIFICATE It is certified that the description and quantity mentioned above are commensurate with the inputs requirement 12[and that the same are not manufactured locally] and that the same are not manufactured locally. It is further certified that the above items shall not be used for any other purpose. Signature ______________________ Name ______________________ N.I.C. No. ______________________ FORM-II

Page 29

(See clause iv) (To be filled in by the 29(Director of IOCO) Header information NTN/FTN of importer Name of importer Approval No. (1) (2) (3) Details of input goods (to be filled by the authorized officer of the Regulatory Goods imported (Collectorate of Authority) import) Date of Applicable Quantity CRN/ Mach. CRN/ HS code Description Specs Customs Duty Collectorate imported No.. Mach. rate No. Quantity UOM (4) (5) (6) (7) (8) (9) (10) (11) (12) (13) It is certified that the description and quantity mentioned above are commensurate with the input requirement, 12[omitted]. Signature ------------------------------------------------- Name ------------------------------------------------- Stamp ------------------------------------------------- Note:- In case of clearance through Pakistan Customs Computerized System 24[Omitted], the above information shall be furnished on line against a specific user I.D. and password obtained under section 155D of the Customs Act, 1969. __ [C.No.1(5)I.I & T-III/2006 (MUSARRAT JABEEN) Additional Secretary As amended 1. S.R.O.694(I)/2006 dated 30.06.2006. 2. S.R.O.1087(I)/2006 dated 31.10.2006 3. S.R.O.42(I)/2007 dated 17.01.2007 4. S.R.O.499(I)/2007 dated 09.06.2007(w.e.f. 10.06.2007) 5. S.R.O.676(I)/2007 dated 04.07.2007(w.e.f.10.06.2007) 6. S.R.O.908(I)/2007 dated 07.09.2007. 7. S.R.O.981(I)/2007 dated 25.09.2007 8. S.R.O.1228(I)/2007 dated 17.12.2007 9. S.R.O.201(I)/2008 dated 29.02.2008 10. S.R.O..269(I)/2008 dated 10.03.2008 11. S.R.O.384(I)/2008 dated 21.04.2008 12. S.R.O.564(I)/2008 dated 11.06.2008(w.e.f.12.06.2008 13. S.R.O.712(I)/2008 dated 02.07.2008 14. S.R.O.107(I)/2009 dated 03.02.2009 15. S.R.O.337(I)/2009 dated 14.04.2009 (w.e.f.10.03.2009) 16. S.R.O.488(I)/2009 dated 13.06.2009(Budget(w.e.f.14.06.2009) 17. S.R.O.589(I)/2009 dated 23.06.2009 18. S.R.O.836(I)/2009 dated 01.10.2009 19. S.R.O.934(I)/2009 dated 28.10.2009 20. S.R.O.392(I)/2010 dated 05.06.2010)w.e.f.06.06.2010) 21. S.R.O.847(I)/2010 dated 31.08.2010 22. S.R.O.475(I)/2011 dated 03.06.2011(w.e.f. 04.06.2011) 23. S.R.O.__(I)/2011 dated 28.12.2011

Page 30

24. S.R.O.573(I)/2012 dated 01.06.2012(w.e.f.02.06.2012) 25. S.R.O.767(I)/2012 dated 22.06.2012 26. S.R.O.120(I)/2013 dated 19.02.2013 27. S.R.O.164(I)/2013 dated 01.03.2013 28. S.R.O.221(I)/2014 dated 31.03.2014 29. S.R.O.565(I)/2014 dated 26.06.2014

Which later SROs refer to this one?

SROs whose FBR title names SRO 565(I)/2006, usually to amend or rescind it.

  • SRO 977(I)/202230 June 2022Amendment in SRO. 565(I)/2006 dated 5th June 2006Amendments to earlier SROs
  • SRO 676(I)/201929 June 2019Amendment in S.R.O 565(I)/2006 dated 05.06.2006Amendments to earlier SROsscanned, text not yet available
  • SRO 1276(I)/201818 October 2018Amendment in S.R.O 565(I)/2006 dated 05.06.2006Amendments to earlier SROsscanned, text not yet available
  • SRO 641(I)/201824 May 2018Amendment in SRO.565(I)/2006, dated 05.06.2006Amendments to earlier SROsscanned, text not yet available
  • SRO 561(I)/20171 July 2017Amendment in S.R.O.565(I)/2006, dated 05.06.2006Amendments to earlier SROsscanned, text not yet available
  • SRO 474(I)/201624 June 2016Amendments shall be made in Notification No. S.R.O 565(I)/2006, dated the 5th June, 2006Amendments to earlier SROs
  • SRO 606(I)/201530 June 2015Amendment in Notification No S.R.O 565(I)/2006 dated the 5th June, 2006Amendments to earlier SROs
  • SRO 565(I)/201426 June 2014Amendment in its Notification no S.R.O 565(I)/2006, dated the june, 2006Amendments to earlier SROs
  • SRO 164(I)/20131 March 2013Amendment in Notification No S.R.O 565(I)/2006, dated 05.06.2006.Amendments to earlier SROsscanned, text not yet available
  • SRO 120(I)/201319 February 2013Amendment in Notification No. S.R.O. 565(I)/2006, dated 5th June, 2006.Amendments to earlier SROsscanned, text not yet available
  • SRO 767(I)/201222 June 2012Amendment in SRO 565(I)/2006 dated 5th June, 2006.Amendments to earlier SROs
  • SRO 573(I)/20121 June 2012SRO.573(I)/2012 is an amending notification of SRO.565(I)/2006Amendments to earlier SROs
  • SRO 1121(I)/201128 December 2011Amendment in SRO 565(I)/2006 dated 5th June, 2006Amendments to earlier SROs
  • SRO 475(I)20113 June 2011Amendment in S.R.O. 565(I)/2006 dated 05.06.2006Amendments to earlier SROs
  • SRO 847(i)/201031 August 2010Amendment in SRO 565(I)/2006 Dated 5th June, 2006Amendments to earlier SROs
  • SRO 392(I)/20105 June 2010S.R.O 392(I)/2010 is an amending Notification of S.R.O 565(I)/2006 dated 05/06/2006Amendments to earlier SROs
  • SRO 934(I)/200927 October 2009Wood sandwich blocks with lead encased included as input material for manufacture of stationery articles under SRO 565(I)/2006.Amendments to earlier SROs
  • SRO 836 (I)/200930 September 2009Amendment in SRO 565(I)/2006 dated 05.06.2006Amendments to earlier SROs
  • SRO 589(I)/200922 June 2009Amendment in Notification No. S.R.O. 565(I)/2006, dated the 5th June, 2006.Amendments to earlier SROs
  • SRO 488(I)/200912 June 2009Amendments in Notification SRo No. 565(I)/2006, dated the 5th June, 2006.Amendments to earlier SROs
  • SRO 107 (I)/20093 February 2009Federal Government is pleased to direct that the following further amendments shall be made in its Notification No. S.R.O. 565(I)/2006, dated the 5th June, 2006Amendments to earlier SROstext not available here
  • SRO 712(I)/20081 July 2008Amendments in Notification No. S.R.O. 565(I)/2006, dated the 5th June, 2006.Amendments to earlier SROs
  • SRO 564(I)/200810 June 2008Amendments in Notification No. S.R.O 565(I)/2006, dated the 5th June, 2006.Amendments to earlier SROs
  • SRO 269(I)/200810 March 2008Amendments in SRO 565(I)/2006.Amendments to earlier SROs
  • SRO 201 (I)/200829 February 2008Amendment in SRO 565(I)/2006 dated 05.06.2006Amendments to earlier SROs
  • SRO 1228 (I)/200717 December 2007Federal Government is pleased to direct that in its Notification No. S.R.O. 565(I)/2006, dated the 5th June, 2006,Amendments to earlier SROs
  • SRO 981 (I)/200725 September 2007Amendments in notification No. S.R.O. 565(I)/2006, dated the 5th June, 2006Amendments to earlier SROs
  • SRO 908 (I)/20077 September 2007Federal Government is pleased to direct that in its Notification No. S.R.O. 565(I)/2006, dated the 5th June, 2006,Amendments to earlier SROs
  • SRO 676(I)/20074 July 2007This SRO amends the S.R.O. 565(I)/2006, dated the 5th June, 2006Amendments to earlier SROs
  • SRO 499 (I)/20079 June 2007Amendment in S.R.O. 565(I)/2006Amendments to earlier SROs
  • SRO 42(I)/200717 January 2007Amendment in S.R.O. 565(I)/2006, dated the 5th June, 2006Amendments to earlier SROs
  • SRO 1087(I)/200631 October 2006Amendment in S.R.O. 565(I)/2006, dated the 5th June, 2006Amendments to earlier SROs
  • SRO 694 (I)/200630 June 2006Federal Government is pleased to direct that the following amendments shall be made in its Notification No. S.R.O. 565(I)/2006Amendments to earlier SROs

Related Customs SROs on exemptions and concessions

  • SRO 695(I)/20061 July 2006Exemption of Customs duty on import of goods into pakistan from SAARC coutries under SAFTA agreementtext not available here
  • SRO 655 (I)/200622 June 2006Exemption of customs duty for vendors of Automotive sector.
  • SRO 577(I)/20065 June 2006Exemption of duty and taxes on vehicles’ imported by diplomatic representatives / mission at the stage of the disposal
  • SRO 576 (I)/20065 June 2006Exemption of duty and taxes on vehicle imported by privileged person /organization / office at the stage of their disposal.
  • SRO 575(I)/20065 June 2006Exemption From Customs Duty on machinery and equipments (Recinded by SRO 564(I)/2014)
  • SRO 567(I)/20065 June 2006Exemption from customs duty on import of specified goods(Non-Survey based) (Rescinded by SRO 563(I)/2014).

All SROs on exemptions and concessions

Report an error on this page