Exemption from customs duty on import of raw materials, sub-components, components, sub-assemblies and assemblies, for manufacture of specified goods (Survey based).

GOVERNMENT OF PAKISTAN MINISTRY OF FINANCE, ECONOMIC AFFAIRS, STATISTICS AND REVENUE (REVENUE DIVISION) *** Islamabad, the 6th June, 2005. NOTIFICATION (CUSTOMS) S.R.O.565(I)/2005.- In exercise of the powers conferred by section 19 of the Customs Act, 1969 (IV of 1969), and in supersession of this Division’s Notification No. S.R.O. 450(I)/2004, dated the 12th June, 2004 and Notification No. S.R.O. 456(I)/2004 dated the 12th June, 2004, the Federal Government is pleased to exempt raw materials, sub-components, components, sub-assemblies and assemblies, as are not manufactured locally, specified in column (3) of the Table below, imported for the manufacture of goods specified in column (2) of the said Table, from so much of customs-duty leviable under the First Schedule to the Customs Act, 1969 (IV of 1969), as are in excess of the rates specified in column (5) of that Table, subject to certain exclusion specified below, the special conditions as specified in column (6) of the Table and the following general conditions, namely: - (i) A sales tax registered manufacturer-cum-importer having suitable in-house facilities shall submit a complete list in the prescribed format of his annual requirement of permissible items (inputs) he intends to import for the manufacture of goods mentioned in column (2) of the table to the Collector of Sales Tax and Central Excise having jurisdiction or to any other organization or person as authorized by the Central Board of Revenue; (ii) the Collector of Sales Tax and Central Excise or the authorized person on receipt of request shall determine the annual quantitative entitlement of inputs, without any physical verification. In case the Collector or authorized person or authority is not satisfied with declared input output ratios of the items to be manufactured because of their being prima-facie, not in accordance with the prevalent average of the relevant industry, he may, after provisionally allowing the quantity demanded make a reference to the Engineering Development Board or to any other recognized authority for final determination thereof and the applicant shall consume imported inputs in accordance with the input output ratios so determined ; (iii) the clearance of inputs is allowed through one port or dry port only; (iv) the authorized officer of Sales Tax Collectorate shall furnish all relevant information online to Customs Computerized System (PACCS) as per form appended to this notification against a specific user ID and password obtained under section 155D of the Customs Act, 1969. In already computerized Collectorate/Customs stations where the PACCS is not yet operational, the Project Director or any other authorized person shall feed the requisite information in the PACCS on daily basis and on weekly basis of the data obtained from the stations which have not yet been computerized; (v) the manufacturer-cum-importer shall file customs declaration on the prescribed format and manner with complete details of authorization of imported inputs for clearance. The Collector of Customs on satisfaction of correct declaration shall allow clearance of imported inputs after obtaining post dated cheque for the differential amount of statutory tax and concessionary taxes. The post dated cheque shall be released or cancelled on receipt of consumption certificate or audit report, as the case may be; (vi) the manufacturer-cum-importer shall maintain records of the inputs and the goods manufactured from imported inputs in such form as may be prescribed by the Central Board of Revenue or required under any other law for the time being in force; (vii) the manufacturer-cum-importer shall communicate to the concerned Collector of Sales Tax and Collector of Customs in writing about the consumption of imported items within sixty days of consumption of goods. In case of non-consumption within one year from the date of import, the importer shall pay the customs-duty and other taxes involved or obtain extension from the Collector of Sales Tax and Central Excise under intimation to Collector of Customs giving plausible reasons for a reasonable period; (viii) the Collector may whenever deemed necessary get the records of the manufacturer-cum-importer audited and initiate proceedings for the recovery of leviable customs-duty and other taxes besides penal action under the relevant provisions of the laws in force if it is found that the inputs have not been properly accounted for or consumed for the manufacture and supply of goods as prescribed; and (ix) vendors and manufacturers capable of in-house manufacturing of goods mentioned in column (3) of the Table below shall be entitled for concession subject to fulfilment of conditions of this notification: Provided the mild steel bars, mild steel rods, mild steel wire rods and plastics shall not be entitled for exemption under this notification. Explanation 1.- For the purpose of this notification the expression “not manufactured locally” shall mean the goods which are not included in the list of locally manufactured goods, specified in the relevant Customs General Order or declared as such by the Central Board of Revenue or Engineering Development Board. Explanation 2.- The importers can simultaneously avail the statutory rate of duty on those items mentioned in the table imported as part of CKD/SKD kits which have statutory rates lower than the CKD/CBU rates under this notification. TABLE S. No. | Description of goods to be manufactured. | Description of raw materials, sub-components, components and assemblies. | Heading or sub-headings Nos. | Extent of exemption from customs duty in excess of rates given below. | Special conditions of import. (1) | (2) | (3) | (4) | (5) | (6) 1. | Agarbatti. | Raw materials Diethyl phthlate. | 2917.3400 | 10% ad val. | Nil 2. | 1 [Air conditioners, deep-freezes, refrigerators, Washing machines, | (A) Air conditioners Raw Materials | 5% ad val. | Nil (1) Hot stamping foil | 3212.1000 (2) Deep draw cold rolled steel coils - of a thickness of 0.5mm or more but not exceeding 1mm. | 7209.1790 (3) Cold rolled steel coils - of a thickness of less than 0.5mm | 7209.1890 (4) Electro galvanized steel sheet | 7210.3090 (5) Bars and rods of copper -nickel base alloys (cupro-nickel) or copper-nickel-zinc base alloys (nickel silver) | 7407.2200 (6) Brazing rod (copper) | 7407.2900 (7) Epoxy resin | 3907.3000 | If imported for manufacture of Electrostatic Coating Powder. (8) Polyester resin | 3907.9900 (9) Organic and inorganic pigments | 3204.1700 (10) Triglycidyl-isocyanurate (TGIC) | 2933.6900 (11) Flow control | 3906.1000 Sub-components and Components. | 10% ad val. | Nil (12) Compressor cover | 8415.9090 (13) Axial fan | 8414.5190 (14) Front panel grill | 8415.9090 (15) Service value 2 way & 3 way | 8481.8000 (16) Terminal block | 8415.9090 (17) Single phase AC motor upto 320 watts | 8501.4090 (18) Remote control | 8415.9090 (19) Plasma filter assembly | 8415.9090 (20) Rubber pipe cut to size | 4009.1100 (21) Compressor | 8414.3010 | 0% ad val. (22) Evaporator enameled & coated | 8415.9010 OR (following raw materials 2 [for manufacture of evaporators and condensers]) (23) Copper Tubes in level wound coils | 7411.1090 (24) Copper Tube inner grooved | 7411.1020 (25) Copper alloys rings for soldering and brazing | 7407.2200 (B) Deep Freezers Raw Material | 5% ad val. (1) Hot stamping foil | 3212.1000 (2) Deep draw cold rolled steel coils - of a thickness of 0.5mm or more but not exceeding 1mm. | 7209.1790 (3) Cold rolled steel coils - of a thickness of less than 0.5mm | 7209.1890 (4) Electro galvanized steel sheet | 7210.3090 (5) Bars and rods of copper -nickel base alloys (cupro-nickel) or copper-nickel-zinc base alloys (nickel silver) | 7407.2200 (6) Brazing rod (copper) | 7407.2900 (7) Aluminum sheet embossed or patterned | 7606.9290 (8) Anti fungal soft PVC compound according to DIN 53 739 | 3904.2200 (9) Hexylamine catalyst and or dinethyolcyoth examine (DMCHA) | 2933.5990 | If imported for manufacture of 2 [Polyol Compound Component A]. (10) Silicon stabilizer | 3402.9000 (11) Epoxy resin | 3907.3000 | If imported for manufacture of Electrostatic Coating Powder. (12) Polyester resin | 3907.9900 (13) Organic and inorganic pigments | 3204.1700 (14) Triglycidyl-isocyanurate (TGIC) | 2933.6900 (15) Flow control | 3906.1000 (16) Copper Tubes in level wound coils | 7411.1090 | 0% ad val. | If imported for manufacture of evaporators and condensers. (17) Copper alloys rings for soldering and brazing | 7407.2200 Sub-components and Components. | 10% ad val. | Nil (18) Glass door | 8418.9990 (19) Light switch | 8535.3010 (20) Lamps of a power not exceeding 20 watts | 8539.2200 (21) Terminal blocks | 8418.9990 (22) Single phase AC motor upto 320 watts | 8501.4090 (23) Compressor | 8414.3010 | 0% ad val. (C) Refrigerators Raw Materials | 5% ad val. (1) Hot stamping foil | 3212.1000 (2) Deep draw Cold rolled steel coils - of a thickness of 0.5mm or more but not exceeding 1mm. | 7209.1790 (3) Cold rolled steel coils - of a thickness of less than 0.5mm | 7209.1890 (4) Electro galvanized steel sheet | 7210.3090 (5) Bars and rods of copper -nickel base alloys (cupro-nickel) or copper-nickel-zinc base alloys (nickel silver) | 7407.2200 (6) Brazing rod (copper) | 7407.2900 (7) VCM sheet | 7210.7090 (8) Anti fungal soft PVC compound according to DIN 53 739 | 3904.2200 (9) Hexylamine catalyst and or dinethyolcyoth examine (DMCHA) | 2933.5990 | If imported for manufacture of 2 [Polyol Compound Component A]. (10) Silicon stabilizer | 3402.9000 (11) Epoxy resin | 3907.3000 | If imported for manufacture of Electrostatic Coating Powder. (12) Polyester resin | 3907.9900 (13) Organic and inorganic pigments | 3204.1700 (14) Triglycidyl-isocyanurate (TGIC) | 2933.6900 (15) Flow control | 3906.1000 Sub-components and Components | 10% ad val. | Nil (16) Light switch | 8535.3010 (17) Lamps of a power not exceeding 20 watts | 8539.2200 (18) Terminal blocks | 8415.9090 (19) Single phase AC motor upto 320 watts | 8501.4090 (20) Compressor | 8414.3010 | 0% ad val. (21) Evaporator (roll bond type) | 8418.9910 | 0% ad val. OR (following raw materials 2 [for manufacture of other type of evaporators and condensers]) (22) Copper Tubes in level wound coils | 7411.1090 (23) Copper alloys rings for soldering and brazing | 7407.2200 (D) Washing Machines Raw Material | 5% ad val. | Nil (1) Deep draw cold rolled steel coils - of a thickness of 0.5mm or more but not exceeding 1mm. | 7209.1790 (2) Cold rolled steel coils - of a thickness of less than 0.5mm | 7209.1890 (3) Electro galvanized steel sheet | 7210.3090 Sub-components and Components | 10% ad val. (4) Terminal blocks | 8415.9090 (5) Single phase AC motor upto 320 watts | 8501.4090 (E) Car Air-conditioners Raw Material | 5% ad val. | Nil (1) Rubber hose (high pressure) | 4009.3100 (2) Aluminium bar | 7604.2910 (3) Aluminium sections | 7604.2990 (4) Aluminium strip clad (in coils) | 7606.1200 (5) Aluminium pipe/tubes | 7608.2000 (6) Brazing coils/filler metal | 8311.9000 Sub-components and Components | 10% ad val. (7) Plastic caps | 3923.5000 (8) Blower wheel | 3926.9099 (9) Belt for compressor | 4010.3110 (10)O ring | 4016.9320 (11) Aluminium fins/corrugated fins | 8415.9090 (12) Bracket (Aluminum) | 7616.9990 (13) Pipes | 8415.9090 (14) Suction/discharge fitting assy | 8415.9090 (15) Distributor assy | 8415.9090 (16) Condenser partition plate/separator | 8415.9090 (17) Stay for sensor | 7616.9990 (18) Side plates for condensers | 8415.9090 (19) HVAC/VAC unit (for current civic model only) | 8415.9090 (20) AC control unit | 8415.9090 (21) Body accumulator | 8415.9090 (22) Capsule for heater core | 8415.9090 (23) Evaporator core plate | 8415.9090 (24) HVAC door sub assembly | 8415.9090 (25) Glass sight/joint receiver | 8415.9090 (26) Insert for heater core | 8415.9090 (27) Switches | 8536.5090 (28) Tank header, plate and header pipe for condenser | 8415.9090 (29) Tubes for condenser/M 2 [tubes]/ Surpentine tubes | 8415.9090 (30) Valves | 8481.3000 (31) Expansion valve | 8481.8000 (32) Idle pully | 8483.5020 (33) Fuse assy | 8536.1000 (34) Actuator | 8415.9090 (35) Clutch magnet for compressor & parts | 8415.9090] 3. | Air-conditioning, chilling, humidification and industrial refrigeration plants. | Raw materials. Sub-components and components Modules / assemblies. | Respective Headings | 5% ad val. 10% ad val. 10% ad val. | As approved by the Engineering Development Borad (EDB) 4. | Alkyd resins. | Raw materials Crude soybean oil, whether or not degummed Crude coconut oil | 1507.1000 1513.1100 | 10% ad val. | Nil 5. | Aluminum presensitized printing plates. | Raw materials Coated paper Aluminum foil. | 4811.5990 7607.1990 | 10% ad val. | Nil 6. | Articles of stationery. | 1 [Raw Materials | 5% ad val. | Nil (1) Other Saturated Acrylic Acids | 2915.9000 (2) Stamping Foil with metallic or pigment coating | 3212.1000 (3) Ink | 3215.9010 (4) Hardeners | 3824.9099 (5) Acrylic Polymer (Fast drawing) | 3906.9090 (6) Alkyd Resins (Fast drawing) | 3907.5000 (7) Amino Resins (Fast drawing) | 3909.3000 (8) Cellulose Nitrate | 3912.2010 (9) Carboxy Methyl Cellulose | 3912.3100 (10) Plastic Film (Shrinkable) | 3920.2090 (11) LDPE Sheet of a thickness upto 1mm. | 3921.9090 (12) Electro Galvanized Wire | 7217.2000 (13) Brass alloy Wire | 7408.2100 (14) Edenol | 3824.9099 (15) Heat Transfer Film | 4908.9000 (16) Laminated Film For Sachet | 3920.2040 (17) Spring Wire | 7217.9000 (18) Zinc Stearate | 3823.1930 (19) Porous fiber rod for manufacturing tips | 3916.9010 Parts and Components | 10% ad val (20) Nibs points (except ball point tips) | 9608.9100 (21) Pen Balls | 9608.9990 (22) Synthetic fiber reservoir of the kind used in writing instruments | 9608.6000 (23) Raw cores used for making black lead | 9609.2010 (24) Precision Barrel Parts for use in manufacture of writing instruments | 9608.9990 (25) High tensile metal clip for writing instruments | 9608.9910 (26) High precision Nibs made of special metal for use in manufacture of writing instruments | 9608.9100 (27) Carbon Lead | 2803.0090 (28) Color Lead | 9609.9000 (29) High precision ink Feed transference system | 9608.9990 (30) Steel Balls | 7326.9020 (31) Tips For Fine Liner | 9608.9100 (32) Pencil Ferrules | 7616.9930] 7. | Artificial leather industry | Raw materials Polyurethene resin PVC emulsion grade Release paper | 3208.9090 3904.1000 4811.5990 | 10% ad val. . | Nil 8. | Audio/video cassettes. | Raw materials (1) Self adhesive sheet (2) Plastic film / foil (3) Packing material (4) Screws (5) Magnetic tape in jumbo rolls | 3919.9000 3921.1900 3921.9090 3923.1000 7419.9900 8523.1300 | 10% ad val. | Nil] 1 [(6). Leader Tape Webs | 3921.9090 (7) Splicing Tape Rolls | 3919.9000 (8) Liner Sheets | 3926.9099 (9) Pressure pads | 5911.9000 (10) Steel shields | 7326.9090 (11) OPP film roll | 3920.1000 (12) OPS roll | 3921.1100 (13) Staking Rod Roll | 3926.9099 9. | Audiotapes 1 [..] | Raw material Polyester base film / polyester film-uncoated. | 3921.1100 | 10% ad val. | Nil 10. | Boilers | Raw material Boiler quality steel plates Sub-components / components Stop/control valve Blow down valve Feed check valve Seamless tubes (cut to size) | 7208.4090 8481.3000 8481.2000 8481.3000 7304.2900 7304.3100 | 5% ad val 10% ad val | Nil 11. | Bearings. | Sub-components and component. Balls, needles and rollers Other parts of bearings | 8482.9100 8482.9910 8482.9990 | 0 % ad val. | Nil 12. | Bolts, nuts, screws, concrete nails and blind rivets. | Raw materials (1) High carbon / high tensile wire rod. (2) High carbon steel wire | 1 [ 7213.9190 7213.9990 7213.9900 | 5 % ad val. | Nil 1 [(3) Brass wire | 7408.2100 (4) Aluminium wire | 7605.1900] 13. | Cables and Conductors. | Raw materials excluding artificial plastic resin. (1) Pigments (2) Wire drawing lubricant (3) Chlorinated paraffin (for PVC compound) (4) Cable filling and flooding compound (5) Water blocking tape (6) Tin coated steel strip (7) High carbon steel wire rod (8) Copper covered steel wire (9) Aluminum strip (10) Core covering tape (11) Polyethylene compound (cable grade) (12) Steel tape / strip (tin free both sides) (13) Aluminium foil strip ( both sides PE laminated) (14) Hot melt sealant / marco melt (15) Water swellable yarn (16) Coloring ink (17) Polybutylene b trephthalate (mbt) (18) Thirotrapic hydrophobojel / jelly (19) Binder yarn (20) Binder tape (21) Glass yarn (22) Identification tape | 3204.1700 3403.1990 3824.9080 3824.9099 5604.9000 7210.1200 1 [ 7213.919 0 7213.9990 7217.3090 7606.9290 3920.1000 3907.6090 7210.5000 7607.2000 3910.0000 5606.0000 3215.9090 3907.9900 2712.1000 5607.4100 5607.4100 7019.1900 3921.1900 | 5 % ad val. | Nil (23) 1 [Semi conducting Nylon / Rubber insulation tape | 5906.9900 (24) Fiber Reinforced Polypropylene / Glass Reinforced Polypropylene | 3916.9090 (25) Aramid yarn | 5402.1000 (26) Single / Multi mode optical fiber (ITU-T G-652, ITU-T G-651 & ITU-T G-655) | 9001.1000 (27) Insulating paper | 4804.2900 (28)Semi conducting tape | 5906.9900] 14. | Centrifugal and turbine pumps. | Sub-components / components (1) Shafting material (2) Raw casting nozzle (3) Raw casting impeller (4) Special couplings (5) Grinding pin | 8413.9190 8413.9190 8413.9110 8483.6090 8414.9000 | 10% ad val. | Nil 15. | Ceramics. | Raw materials 1 [(1) omitted (2) Grinding stone (3) Alumina lining bricks/ceramic roller, (4) Refractory products of kind used in industrial ovens, kilns, and furnaces | Omitted 6804.1000 6903.2000 6903.9010 | omitted.] 5 % ad val 10 % ad val | Nil 16. | Circuit Breakers | Sub-components & components (1) Nut (2) Pin (3) Springs (4) Lever (5) Bearing (6) Charging shaft (7) Cam (8) Contact bush (9) Half shaft mounted (10) Rectifier (11) Burn off indicator (12) Switch (limit,micro) (13) Terminal (14) Vacuum interrupter / bottle (15) Drive frame (16) Contact holder (17) Pole housing (18) Contact support (19) Contact angle (20) Guide (bush) (21) Housing assy. (22) Shock absorber (tube) (23) Roller (24) Shroud (cover) (25) Partition wall CPL (26) Partition kpl (right & left) (27) Connecting rod (28) Connecting bear welded (29) Strip (30) Angle (31) Stirnrad (32) Plunger head (33) Plate (plate, stopper) (34) Stopper (35) Counter | 7318.1690 7319.3000 7320.9090 7326.9090 8482.8000 8483.3010 8483.3010 8483.3010 8483.3010 8504.5000 8531.8000 8536.5090 8536.9090 8538.9010 8538.9090 8538.9090 8538.9090 8538.9090 8538.9090 8538.9090 8538.9090 8538.9090 8538.9090 8538.9090 8538.9090 8538.9090 8538.9090 8538.9090 8538.9090 8538.9090 8538.9090 8538.9090 8538.9090 8538.9090 9029.1090 | 5% ad val. | Nil 17. | CNG Dispensers | Sub-components / components | 0% ad val. | Nil 1 [(1) Filter Elements | 8421.3990 (2) Valve 2 Way & 3 Way | 8481.8000 (3) SS ST Connecton, SS Elbow, SS Tee, SS Nipple | 7307.2200 7307.2900 (4) Bulk Head Fitting | 7609.0000 (5) Flat Panel Display & LCD Display | 8537.1000 (6) Solenoid Valves | 8481.1000 (7) Muffler Sleeves | 8413.9190 (8) Stainless Steel Tube 1/2''-3/4''-1/4'' | 7306.9000 (9) Touch Key Pad | 8471.9090 (10) Processor Board With Cables | 8537.1000 (11) Processor Computer | 8537.1000 (12) Ball Valves | 8481.8000 (13) Needle Valves | 8481.8000 (14) SAE Fittings | 7609.0000 (15) A/D Cards | 8537.1000 (16) Connector Board And Electronics | 8413.9190 (17) Flow Meter | 9026.1000 (18) Gas Detector | 9027.1000 (19) Hose Assemble 1Ft,12 Ft and 14 Ft. | 4009.4100 (20) Power Supply | 8504.4090 (21) Pressure Gauge | 9026.2000 (22) Pressure Regulator | 9026.2000 (23) Pressure Transducer | 9026.2000 (24) Quick Disconnect | 8413.9190 (25) Soleonid Valve Block | 8413.9190 (26) Transmitter | 8413.9190] 18. | Composite Doors & Windows | Raw materials (1) Blowing agent (2) Polyol (3) Wood plastic composite granules Components (4) Hinges | 2903.4910 3824.9099 3904.2100 8302.1000 | 5% ad val. 15% ad val | Nil 1 [18A | Composite roll-formed window and doors | Raw material (1) Electro galvanized coils | 7210.3010 7210.4910 7210.7020 | 10% ad val. | Nil Component (2) Float glass | 7005.1000 7005.2100 | 15% ad val.] 19. | Computer monitors | CKD kits for assembly, comprising of Color Display Tube, Printed Circuit Board, Fly Back Transformer, Bracket, Back Cover, Cable Tie, Cable D-Sub, Capacitor, Coil, Connector, Core, Diode, Diskette Assembly, Earth, Eyelet, Filter, Fuse, Holder, Ic, Inductor Axial Lead, Lead Set, Led, Power Cord, Relay, Resistor, Resonator, Screw, Shield, Socket C.P.T., Socket Power, Solder Wire, Spark Gap, Spring Coil, Switch, Thermistor, Tilt T Swivel, Transistor, Wafer, Wire, 1 [ Metal rubber, Ribbon, Heat sink and Front cabinet. ] | 8471.6079 | 0 % ad val. | Nil 20. | Cranes and derricks. | .Raw materials (1) Steel plates (2) Flex flat cable Sub-components/ components. modules/ assemblies . (3) Bus bar main power supply | 7208.0000 7312.1020 8544.5990 | 5% ad val. 10% ad val | Nil 21 | Defense stores, machinery and equipment manufactured for the use of defense forces. | Raw materials, Sub-components and components. | Respective Headings | 5 % ad val. 10% a d val. | Under the certificate from the Director General Defense Production, Ministry of Defense, Government of Pakistan. 22 | Diapers and sanitary napkins. | Raw materials (1) Adhesives based on polymers or rubbers. (2) Toilet or facial tissue stock, towel or napkin paper of a kind used for household or sanitary purpose (non-porous). (3) Non-wovens, whether or not impregnated, coated, covered or laminated of man made filaments. (4) PE + NW laminate sheet, (5) Frontal tape, (6) Pre laminated tape, (7) Perforated poly film, (8) Poly back sheet, (9) Hot melt adhesive, (10) Siliconised paper, (11) Loop pile fabric. | 3506.9190 4803.0000 2 [ 5603.1100] 1 [ 5603.120 0] 3920.1000 3920.9900 3920.9900 3920.9900 3920.9900 3906.9190 4810.9900 6001.2200 | 10% ad val. | Nil 23 | Diesel generating Sets | Diesel generating sets Raw materials (1) Insulating varnish class f insulation (2) Impregnating resin (3) Laminated polyester paper sheets/strips for electric insulation 0.20mm to 0.50 mm thick (4) Insulating glass sleeve (round/flat ) 1.5mm to 20mm dia (5) Resiglass insulating tape 0.3 x 20mm (6) Enamel copper wire - round/flat (7) Electric cables rubber /silicon insulated, 0.50mm2 to 150mm2 Sub-components / component s (8) Flexible exhaust extension pipe type nsn6115-17-044-3839 cut to size (9) Steel keys (10) Condensers 2x0.027 mf (11) Rotor for generator (12) Thyripart excitation system (13) Transformer current/ voltage 20/5a-200/5a-30va. 100/5a-200/5a and 380v-415v 300-500/5a 600-1600/5a (14) Chokes 110v - 415 v (15) Capacitors / condensers 4mkv-20mkv 1000-660v (16) Selector switch (17) Plugs and socket upto 250v /upto 250a (18) Contactors 3.2a- 250a / 24-415v (19) Fuse base/ caps / adapters / fuse collar (20) Screw safety insert 35 to 150amps (21) Terminals (22) Pyrometer element | 3208.9010 3907.9900 4807.9000 7019.9010 7019.9090 8544.1190 8544.6000 7307.9900 7326.9010 8503.0090 8503.0090 8503.0010 8504.3100 8504.9090 8532.9090 8536.5090 8536.6900 8536.9090 8536.9090 8536.9090 8503.0090 9025.8090 | 5 % ad val. 10% ad val. | Nil 1 [(23) Diesel Engines above 85 HP | 8408.9000 ] 24 | Digital radio system for access and mobile network. | Parts which are to be used solely or principally with the apparatus of heading 85.25 to 85.28. | 8529.9090 | 0 % ad val. | Nil] 25 | Disposable syringes and needles. | Raw materials (1) Printing ink, (2) Epoxy bond, 1 [(3) PVC (medical grade) (4) Plastic film (medical grade)] (5) PVC gaskets, (6) Silicon oil, (7) Rubber gaskets, (8) Paper labels | 3215.1110 3506.1090 3904.1090 3920.2040 3921.9090 3923.5000 3910.0000 4016.9310 4821.1000 | 5 % ad val. | Nil 26 | Dry battery cells. | Raw materials (1)Natural manganese dioxide, (2) Acetylene black (3)Electrolytic manganese dioxide, (4) Ammonium chloride, (5) Zinc chloride, (6) Mercuric chloride, (7) Electrolytic paper, (8) Zinc slugs, (9) Carbon rods. | 2530.9010 2803.0020 2820.1010 2827.1000 2827.3600 2827.3990 4811.9000 7907.0010 8545.9020 | 0 % ad val. | Nil 27 | Dyes stuff and chemicals. | Raw materials (1) Cresylic acid, (2) Creosote oil, (3) Petroleum jelly, (4) Sodium sulphate, (5) Napthalene, (6) Glycerol, (7) Formic acid, (8) Diazo, aroor-azoxy- compounds, | 2707.6000 2707.9100 2712.1000 2833.1100 2902.9010 2905.4500 2915.1100 2927.0010 | 10% ad val. 5% ad val | Nil 28 | Electric bulbs & Tube Lights. | 1 [( A) Electric Bulbs Raw materials | 5 % ad val. | Nil (1) Additive adhesive | 3824.9099 (2) Borax decahydrate | 2840.1900 (3) Getter for bulbs | 2835.3900 (4) Marble powder | 2517.4100 (5) Stamping paste or marking Ink | 3215.1990 3215.9010 (B) TUBE LIGHTS Raw materials (6) Additive Adhesive | 3811.9000 (7) Prepared binders | 3824.9099 (8) Aluminium sheet or Strip | 7606.1200 (9) Bakelite (sheet or/strip) | 3921.1100 (10) Borax decahydrate | 2840.1900 (11) Brass pin | 7415.1000 (12) Butyl acetate | 2915.3300 (13) Emmission carbonate (Triple oxide) | 3824.9099 (14) Ethyl acetate | 2915.3100 (15) Nitrocellulose | 3912.2010 (16) Stamping paste or marking Ink (Fluorescent) | 3215.1910 3215.9010] 1 [28A | Tube light caps | (1) Vulcanized fiber | 3920.7200 | 0% ad val. | Nil] (2) Brass wire | 7408.2100 (3) Brass pin | 7415.1000 (4) Aluminum sheet | 7606.1200 (5) Bake-light (Phenolic laminate/ epoxy) | 8546.9000 (6) Insulating fitting (glass coated) | 8547.9000 29 | Electric meters, electrical capacitors, industrial switchgears, high voltage electrical switches. | 1 [(A) ELECTRIC METERS | Nil Raw Material | 5% ad val. (1) Aluminium Sheet/Strip | 7606.1200 (2) Copper Enamelled Wire AWG # 34 & 37 (of dia 0.12mm to 0.4mm) | 8544.1110 8544.1190 (3) Copper Strip/Sheet | 7409.1100 (4) Electrophoretic Paint ( Water based) | 3208.9090 (5) Epoxy Resin | 3907.3000 (6) Nylon Moulding Compound | 3908.1000 (7) Phenolic Moulding Powder | 3909.4000 (8) PPO Resin | 3908.1000 (9) Stainless Steel Strip | 7211.1990 (10) Stamping Foil | 3212.1000 Sub-components and Components | 10% ad val. (11) Adjustable Rivets | 7415.3900 (12) Lag Plate | 9028.9020 (13) Rivets | 9028.9020 (14) Screws Nickle Plated | 7318.1400 (15) Self Tapping Screws | 7318.1400 (16) Tap Tite Screws | 7318.1400 (B) ELECTRICAL CAPACITORS Raw Materials | 5% ad val. (1) Aluminum Foil (99.9% purity electrolytic grade, plain and etched) | 7607.1100 (2)BOPP Film (Metalized capacitor grade) | 3920.2030 (3) BOPP Film (Plain capacitor grade) | 3920.2010 (4) Capacitor Impregnation Oil | 3910.0000 (5) Epoxy Resin | 3907.3000 (6) Hardener | 3824.9030 (7) Insulating Paper | 4823.9090 (8) Molding Resin for capacitors | 3903.1900 3907.9900 (9) Polyester / Polypropylene seal Film | 3920.2090 (10) Polyurethane Resin | 3907.3000 (11) Vermiculite Exfoliated | 6806.2000 (12) Zinc Tin Alloy Wire | 7904.0010 (13) Zinc Wire | 7904.0010 Sub-components and Components | 10% ad val. (14) Supporting Kernels | 8532.9090 (15)Silicon Rubber Seals | 4016.9200 (16) Insulating Cover Sleeve | 8546.9000 (C) Industrial Switchgears and High Voltage Electrical Switches Raw Materials | 5% ad val. (1) Cold Rolled Steel Sheet less than 0.5mm | 7209.2590 (2) Dyes | 3204.1700 Sub-components and Components | 10% ad val. ] (3) Bulbs upto 20 watts | 8539.2990 (4) Capacitor Trip Units | 8536.9090 (5) Combined Electronic Meter | 9028.3000 (6) Fuses | 8536.1000 (7) Switches (not domestic) | 8535.3010 8536.5090 (8) Transformers upto 1 KVA | 8504.3100 30 | Electronic diagnostic, monitoring and laboratory equipments for medical use. | Raw materials. Sub-components and components, Sub-assemblies. | Respective headings. | 5% ad val. | As recommended by the Engineering Development Board (EDB) 31 | Eylets. | Raw material Copper strips | 7409.1900 | 10% ad val. | Nil 32 | Flat-rolled products of iron or non-alloy steel plated or coated with zinc. | Raw material CRC sheets of thickness of less than 0.5 mm | 7209.1800 | 5 % ad val. | Nil 33 | Footwear. | Raw materials (1) Masterbatch, (2) PU paints, (3) Release agents, (4) Wax cream, (5) Shoe adhesives, (6) Isocyanate, (7) Desmodur re, (8) Toe puff material, (9) Fibre board, (10) Insole board, (11) Combralla lining material, (12) Shoe reinforcement tapes. | 3204.1700 3208.9090 3403.1990 3405.1010 3506.9100 3824.9099 3824.9099 3921.9090 4411.3900 4811.5990 5603.1300 5906.1000 | 10% ad val. | Nil 34 | Formic acid. | Raw material Sodium hydro oxide {caustic soda in aqueous solutions (soda lye or liquid soda)}. | 2815.1200 | 20% ad val. | Nil 35 | Grinding Wheel. | Raw material Glass fiber disc | 7019.9090 | 1 [5% ad val]. | Nil 36 | High Pressure Laminate (Formica) | Raw materials Printed decorative paper Plain decorative paper Saturating Kraft paper | 4811.9000 1 [ 4805.9190] 4804.3100 | 5% ad val. | Nil] 37 | Insulators. | Componen t Caps | 1 [ 7325.990 | 10% ad val]. | Nil 38 | Interlining fabrics. | Raw material Melamine resin | 3909.2000 | 10% ad val. | Nil 39 | Leather Tanning 1 [(Chromium sulphate)] | 1 [Raw material Sodium dichromate. | 2841.3000 | 5% ad val. | Nil] 40 | LPG tanks, gas pressure regulators, bowzer, cylinder. | Raw materials , Sub-components and components . | Respective headings | 5 % ad val. 10% ad val. | As recommended by the Engineering Development Board (EDB) 41 | Manufacture or formulation of Agricultural pesticides by manufacturers or formulators duly recognized and approved by the Ministry of Food and Agriculture. | Raw materials (i) oils and other products of distillation of high temperature, coal-tar and similar products in which the weight of the aromatic constituents exceeds that of non-aromatic constituents. (ii) all active ingredients for pesticides registered by the department of plant protection under the agricultural pesticides ordinance 1971(ii of 1971), stabilizers, emulsifiers and solvents. | omitted 2707.9100 2707.9990 1 [ 2707.5000] 2710.9900 | 5% ad val. 0 % ad val. | Nil (1) | Xylol (xylenes) | 2707.3000 (2) | - Beta Pinene / Agrotin 527 / Terpenic derivative | 2902.1990 (3) | Toluene | 2902.3000 (4) | Mixed xylene isomers | 2902.4400 (5) | Naphthalene | 2902.9010 (6) | Solvesso-100, 150, 200 | 2902.9090 (7) | Ingredients for pesticides | 2903.3040 (8) | Cadusafos Technical Material | 2903.6900 (9) | Methanol ( methyl alcohol ) | 2905.1100 (10) | Propylene glycol (propane-1, 2-diol) | 2905.3200 (11) | - Adhesives Polyvinyl Acetate - Polyvinyl Alcohol | 2905.4900 (12) | Ingredients for pesticides | 2906.2910 (13) | Other Ingredients for pesticides | 2906.2990 (14) | - Solvenon MP / 1-Methoxy 2-Propanol - Methyglycol Acetate | 2909.4910 (15) | Methanal (formaldehyde) | 2912.1100 (16) | Cyclo-hexanone and methyl- cyclo-hexanones | 2914.2200 (17) | - Cyclohexanon - Cyclohexanone Mixed petroleum Xylene (1,2 & 1,3 & 1,4 dimethyl benzene and ethyle benzene) | 2914.2990 (18) | Acetic anhydride | 2915.2400 (19) | Ingredients for pesticides | 2916.3920 (20) | Dioctyl orthophthalates | 2917.3200 (21) | Ingredients for pesticides | 2918.9010 (22) | Ingredients for pesticides | 2919.0010 (23) | Other Ingredients for pesticides | 2919.0090 (24) | Endosulfan Technical Material | 2920.9020 (25) | Other Ingredients for pesticides | 2920.9090 (26) | Diethylamine and its salts | 2921.1200 (27) | Ingredients for pesticides | 2921.4310 (28) | Other Ingredients for pesticides | 2921.4390 (29) | Ingredients for pesticides | 2921.5110 (30) | Triethanolamine and its salts | 2922.1300 (31) | Dimethyl Formamide (DMF) | 2924.1990 (32) | Ingredients for pesticides | 2924.2930 (33) | Other Ingredients for pesticides | 2924.2990 (34) | Alpha cyano, 3-phenoxybenzyl (-)cis, trans 3-(2,2-diclord vinyl) 2,2 dimethyl cyclopropane carboxylate | 2926.9010 (35) | (S) Alpha cyano, 3-phenoxybenzyl (S)-2-(4, chloro phenyl)-3 mehtyl butyrate | 2926.9020 (36) | Cyano, 3-phenony benzyl 2,2,3,3 tetra methyl cyclopropane carboxalate | 2926.9030 (37) | - Cypermethrin, Alpha Cypermethrin, Beta-Cypermethrin, Zeta-Cypermethrin, Lambda Cylalothrin, Deltamethrin, Fenpropathrin, Esfenvalerate, Bifenthrin Technical Material - Acetamiprid, Imidacloprid Technical Material - Monomehypo, Chlorothalonil Technical Material - Bromoxynil Technical Material | 2926.9050 (38) | Other nitrite compounds - Cyfluthrin, Beta Cyfluthrin Technical Material | 2926.9090 (39) | 2-N, N-Dimethyl amino-I sodium thiosulphate, 3-thiosulfourropane | 2930.2010 (40) | Ingredients for pesticides | 2930.2020 (41) | 2- N,N-dimethyamino 1,3 disodium thiosulphate propane | 2930.9010 (42) | O,S-dimethyl phosphoramidothioate | 2930.9020 (43) | S-S (2 dimethyl amino (trimethylene) bis (thio carbamate) | 2930.9030 (44) | Diafethiuran technical (itertbutyl) 3-2-6 disopropyl (4-phenoxyphenyl) thiourene | 2930.9040 (45) | O-O diethyl O-(3,5,6 trichloro pyridinyl) phosphorothioate | 2930.9050 (46) | O-(4-bromo, 2-chloro phenyl) o-ethyl s-propyl (phosphorothioate) | 2930.9060 (47) | O,O duethyl O-(3,5,6-trichloro 2-pyridyl) phosphorothioate | 2930.9070 (48) | Ingredients for pesticides | 2930.9080 (49) | Other orgonosulpher compounds - Ethion, Methamidophos Technical Material - Dimethysulfoxid | 2930.9090 (50) | Ingredients for pesticides | 2931.0010 (51) | Other Ingredients for pesticides | 2931.0090 (52) | Ingredients for pesticides | 2932.2920 (53) | 2,3 Dihydro 2-2 dimethyl-7 benzo furanyl methyl-carbamate | 2932.9910 (54) | Other ingredients for pesticides - Carbosulfan Technical Material | 2932.9990 (55) | Ingredients for pesticides | 2933.3930 (56) | Other Ingredients for pesticides | 2933.3990 (57) | - Chlorpyrifos, Triazophos, Diazinon Technical Material | 2933.5950 (58) | Other Ingredients for pesticides | 2933.5990 (59) | Pyrimethanine | 2933.6910 (60) | Ingredients for pesticides | 2933.6940 (61) | - Atrazine Technical Material | 2933.6990 (62) | Isatin (lactam of istic acid) | 2933.7910 (63) | 1-Vinyl-2-pyrrol-idone | 2933.7920 (64) | - Triazophos Technical Material | 2933.9910 (65) | Ingredients for pesticides | 2934.1010 (66) | Ingredients for pesticides | 2934.9920 (67) | -Methyl benzimidazol - 2 - ylcarbamate. -Dicopper chloride trihydroxide | 2938.9010 (68) | Ingredients for pesticides | 2939.9910 (69) | - Abamectin, Emamectin Technical Material | 2941.9050 (70) | Other Ingredients for pesticides | 2941.9090 (71) | Sulphonic acid (Soft) | 3402.1110 (72) | Other surface active agents | 3402.1190 (73) | Catonic | 3402.1290 (74) | Non ionic surface active agents | 3402.1300 (75) | Other organic surface active agents | 3402.1990 3402.9000 (76) | Chemical preparations | 3824.9099 42 | Master Batches | Pigments, dyes, additives, fillers, resins . (1) Iron Oxide (2) Other carboxylic acids (3) omitted (4) omitted (5) omitted (6) omitted (7) Other Pigments (8) Ultramarine (9) Lithophone (10) Aluminium Paste & powder (11)Non Ionic surface active agent (12) Other surface active agent (13) Prepared wax (14) Other prepared wax (15) Other Binders (16) Other polymers of styrene (17) omitted (18) Polymethy Methacrylate (19) Other Acrylic Polymers (20) Other Polyacetals (21) Polyamides | 2821.1010 2918.2900 omitted omitted omitted omitted 3206.2090 3206.4100 3206.4210 3212.9010 3402.1300 3402.1900 3404.9010 3404.9090 3824.9099 3903.1900 omitted 3906.1000 3906.9090 3907.9900 3908.1000 | 5 % ad val. | Nil 1 [(22) Dispersing agent | 2835.3900 2905.4400 2912.1900 2905.4500 (23) Collodium wool (NC) | 3912.2090 (24) Alcoprint (thickners) | 3809.9100 (25) White oil | 2710.1996 (26) Silicone oil | 3910.0000 (27) Enzymes | 3507.9000 ] 43 | Medical equipment as follows: (i) Dialysers (ii) Blood Tubing lines for dialysis comprising of Arterial & Veinous lines (iii) Arterial & Veinous Fistula Needle sets comprising Arterial and Veinous Lines. | Raw materials & components | Respective Headings | 0 % ad val. | As recommended by the Engineering Development Board (EDB) 44 | Medical Diagnostic Sticks. | Raw material Composite diagnostic re-agent. | 3822.0000 | 10% ad val. | Nil 45 | Metallic yarn / Powder | 1 [Raw material Epoxy amino 2 [film] Un-coated polyester resin | 3907.3000 3920.6200] | 5% ad val. | Nil 46 | Oil refining (mineral oil /hydro-cracking and other value added petroleum products). Plants for petro-chemical / petro-chemical down stream products (including fibers), Cool chain plants, Plants for heavy chemical industry. | Raw materials, sub-components, components, sub-assemblies and assemblies, | Respective headings | 0 % ad val. | As recommended by the Engineering Development Board (EDB) 47 | Oleo-chemical/ Stearic acid. | Raw materials (1) Palm stearin, (2) Crude soya-bean oil, (3) Crude palm oil (4) Crude coconut oil, (5) RBD coconut oil, (6) Palm acid oil, (7) Palm kernel acid oil. | 1511.9010 1507.1000 1511.1000 1513.1100 1513.1900 3823.1920 3823.1990 | 5 % ad val. 10% ad val. | Nil 48 | Paper and Paper Board. | Raw material Cationic potato starch, | 3505.1090 | 15% ad val. | Nil 49 | Printed circuit boards . | 1 [Raw Materials | 5 % ad val. | Nil (1) Accelerator | 3824.9099 (2) Ammonical Etchant (Various Types) | 3824.9099 (3) Aluminium Entry or Exit Foil | 7607.2000 (4)Anti Foam | 3824.9099 (5)Carbon Conductive Ink | 3215.9090 (6)Carbon Ink Retarder or Thinner | 3814.0000 (7) Connector (Fpc) | 8536.6990 (8) Diazo Film | 3701.3090 (9) Etch Resist Ink | 3215.9090 (10) Etch Resist Ink Thinner or Retarder | 3814.0000 (11) Gold Plating Tape | 3919.9000 (12) Identification or Legend Ink Retarder or Thinner | 3814.0000 (13) Identification or Legend Ink (Various Parts) | 3215.9090 (14) Jig Stripper | 3824.9099 (15) Line or Laser Plotter Film | 3701.3090 (16) Screen Adhesive | 3506.9190 (17) Screen Cleaner | 3814.0000 (18) Screen Mesh | 5911.2000 (19) Silver Ink | 3215.9090 (20) Silver Ink Thinner or Retarder | 3215.1900 (21) Solder Mask/Resist Ink (Various Parts) | 3215.9090 (22) Solder Mask or Resist Thinner or Retarder | 3814.0000 (23) Squeegee (of polyurethane) Blade | 3921.1300 (24) Test Probes And Recepticles | 7319.3000 (25) Tin or Lead Stripper (Various Parts) | 3824.9099 (26) Enamelled wire | 8544.1110] 50 | Printing ink. | Raw materials (1) Organic pigments, (2) Resins. 1 [(3) Driers | 3204.1700 3912.2090 3211.0090] | 10% ad val. | Nil 51 | PVC Compound. | Raw materials (1)Pigments (2) Chlorinated paraffin (for pvc compound) | 3204.1700 3824.9080 | 5% ad val. | Nil 52 | Refrigerated vehicles and chillers for milk storage. | Raw materials, Sub-components and components. | Respective Headings | 5% ad val.. 10% ad val. | As recommended by the Engineering Development Board (EDB) 53 | Refining of Crude Palm Oil | Raw material Crude palm oil | 1511.1000 | Rs.9000/PMT | If imported by fully operational Crude Palm Oil refineries. 54 | Ribbons for Typewriter/computer printers. | Raw materials (1) Nylon fabrics, (2) Polyethylene film, (3) Empty cartridges. | 5903.9000 3920.1000 3926.9090 | 10% ad val. | Nil 55 | Rubber V-Belt | Raw material Polyester cable cord. | 5607.5000 | 10% ad val. | Nil 56 | Seamless pipes. | Raw materials (1) Special steel round bars and rods of non- alloy steel exceeding diameters 75 mm. (2) Lubricating anti-rust and anti-corrosion preparation. | 7214.9900 3403.9990 | 10% ad val. | Nil 57 | Security Printing Ink | Raw material Phenolic modified alkyd resin | 3907.5000 | 10% ad val. | If imported for use in printing of Currency Notes. 58 | Solar cells, panels, modules. | Raw materials, Sub-components and components, Sub-assemblies. | Respective Headings | 5% ad val. 10% ad val. 15% ad val. | As recommended by the Engineering Development Board (EDB) 59 | 1 [Toilet] Soap Industry. | Raw materials (1) Palm stearin, (2) Coconut crude oil (3) Crude palm kernel oil, (4) Cresylic acid, (5) Surface active agents, | 1511.9010 1513.1100 1513.2100 2707.6000 3402.0000 | 10% ad val. | Nil 60 | Sugar mill. Cement plant. Plants for the production of industrial chemicals. Thermal power plant. Hydel Power Plantt. Fertilizer plants. Heat exchangers, pressure vessels, Coloumns, filters, production separators, coolers and boilers. Machinery for the manufacture of surgical goods, sports goods and stuffed toys. Machinery supplied to the approved manufacturers / assemblers of vehicles, capital goods, electronics equipment and system, consumer durable items and auto parts. Marble processing industry. Steel pipes/tubes industry. Plant, machinery and equipment as in Tables of Notification No. S.R.O. 439(I)/2001, dated the 18 th June 2001. Machinery and capital goods or engineering goods meant for export. Textile machinery. Certain types of oil and gas development plants Machinery, equipment, intermediary or capital goods and specialized vehicles (4 x 4 non luxury) excluding passenger vehicles. Machinery, equipment, vehicles and intermediary or capital goods. Any other industrial plant recommended and approved by Engineering Development Board and the Central Board of Revenue. | Raw materials, Sub-components and Components, | Respective Heading | 0 % ad val. | Supplies to the export sector (the PCT headings of such inputs including raw materials and other articles even manufactured locally as indicated by the EDB) or to exempt industrial units, projects, and agencies or imported by recognized local manufacturers of Heavy Engineering Goods. Supplied to electric power generation i.e. oil, gas, hydel, coal, wind and wave energy projects, their expansion or modernization, including under construction projects, and captive power projects. Supplies against international tender to the projects financed out of international loan or aid giving agencies. -- 61 | Telephone sets, fax machines, speakers, small transformers, telecommunication equipments, electronic exchanges, PABX /digital switching equipments. | Raw materials. Sub-components and components, Sub-assemblies. | Respective Headings | 5 % ad val. 10% ad val 10% ad val. | As recommended by the Engineering Development Board (EDB) 62 | Telecommunication apparatus for Carrier Current Line Systems or for Digital Line Systems. | Parts which are to be used with the apparatus of heading 8517.5000, 8517.8030 and 8517.8090. | 8517.9000 | 0% ad val. | Nil 63 | Textile Machinery | Raw materials, Sub-components and components, Sub-assemblies and assemblies. | Respective Headings | 0% ad val. | If imported by local assemblers/ manufacturers duly recognized / recommended by EDB. 1 [63A. | Plastic Injection Moulding Machines Pressure Die Casting Machine CNC Machine Tools | Raw materials, Sub-components, Components and Sub-assemblies | Respective headings | 0% ad val. | If imported by local assemblers or manufacturers duly recognized or recommended by EDB giving input-output ratios. 63B. | CNC machinery for metal cutting and forming Machining centers (All types) Turning centers (All types) Others CNC Plastic Injection Moulding Machines CNC Blow Moulding Machines CNC Extrusions Lines | Raw materials, Sub-components, Components and Sub-assemblies | Respective headings | 0% ad val. | If imported by local assemblers or manufacturers duly recognized or recommended by EDB giving input-output ratios. ;] 64 | Thermosetting powder. | Raw material (1) Epoxide resin. | 3907.3000 | 10% ad val. | Nil 1 [(2)Leucite: nepheline and nepheline syenite | 2529.3000 (3) Calcium carbonate | 2836.5000 (4) Polyester resins in chip/ granual form | 3907.9900 (5) Exfoliated vermiculite, expanded clays, foamed slag and similar expanded mineral materials (including intermixtures thereof) | 6806.2000] 65 | Tyres and tubes. | Raw materials (1) Antioxidents/ antiozonants, (2) Rubber accelerators / retarders, (3) Rubber - natural, (4) Rubber- synthetic, (5) Nylon tyre cord fabrics, (6) Polyester tyre cord fabrics (7)Bead wire, (8) Brass plated steel tyre cords. | 1 [ 2921.519 0 3812.1000 4001.2100 4001.2200 4001.2900 4002.1900 4002.2000 4002.3100 4002.3900 4002.7000] 5902.1000 5902.2000 7217.3010 7312.9010 | 0 % ad val. | Nil 66 | Tufted carpets. | Raw materials (1) Thickners (2) Woven fabrics of synthetic filament yarn. 1 [(3) Felt backing | 3906.9090 5407.2000 5603.9300] | 5% ad val. 5% ad val. 5% ad val | Nil 67 | Under EEPAS Television sets. | Ckd kits for assembly and manufacture of tv sets, comprising of following:- (1) Rubber tube ( cut to size) (2) Screws (3) Eyelet (4) Solder wire (5) Flyback transformer (6) Coil (7) Battery (8) Speaker (9) Core (10) Transmitter r/c (11) Filter (12) Capacitor (13) Board, PCB (14) Fuses (15) Switch (16) Socket CPT (17) Inductor exil lead,wire, cord , cable assembly, lead set, lead wire (18) Picture tube for colored TV (19) Picture tube for black & white TV | 4009.1100 7318.2200 8308.1020 8311.3000 8504.3100 8504.5000 8506.9090 8518.2200 8528.1290 1 [8529.1090] 8532.2900 8532.3000 8534.0000 1 [8536.1000 8536.5090 8536.6910] 8544.5100 8540.1100 8540.1200 | 5% ad val. 0% ad val | Nil 1 [(20) Thermister | 8533.2900 | 5% ad val. (21) Resister | 8533.2900 (22) Resonator | 8529.9090 (23) Holder | 8536.6100 (24) Deflection yok | 8540.9100 (25) Diode | 8541.1000 (26) Transistor | 8541.2100 (27) IC | 8542.9000 (28) Connector | 8536.9090 (29) Adopter, Adhesive tube, Ana band tube, Antenna, Back cover, Band, Base, Bracket, Button, CA mask, Cap, Case, Chassis Assembly, Cover Dom, Cover Mini, Cover shield, Cover speaker, Clip plug, Clamps, Cover tuner, CPM, CPT earth, Crystal, Cushion, Decoration, | 8529.9090 Delay line insulator, Flux, Focus pack, Frame, Fixture, Handle, Heat sink, Hook, Inductors, Jack, Led, Leg, Lens, Link, Magnet, Mark, Mirror, Nuts, Panel-Metal, Piece, Pin, Plate, Plate compensation, Preamp, Sheet mechanism, Shield, Silicon, Socket IC, Socket Speaker Gap, Speaker grill, Speaker tweeter tape, Spring, Stopper, Supporter, Tie, Tuner, Varistor, Washer, Wedge, Window, Window A/B, Wafer, Wax, Wrap.] 68 | Under EEPAS Cellular mobile phones; Laser video disc players; DVD player, VCD player; VCP (Video Cassette Player); VCR(Video Cassette Recorder); Compact disc player; Stereo car cassettes players; Hi-fi system; Pocket size cassette player; CD players; Radio-cum-cassette player; Radio; Electronic calculator; Microwave ovens; Caller Line Identification (CLI) apparatus, Plasma T.V sets/LCD Panel sets.. | (I). Raw materials, sub- components, components for the electronic apparatus. (ii). SKD Kits For Assembly Of Microwave Ovens, VCP, VCR, VCD, DVD Apparatus And Plasma T.V. Sets/LCD Panel Sets Under “Emerging Electronics Products Assembly Scheme” (EEPAS) imported in more than seven components, SKD kits would not contain packing materials, carton boxes, brochures and the printed materials. (a) Microwave Oven (1) Screw set (2) Main chassis and frame with motor (3) Power supply assy. (4)Main mounted circuit board, (5) Cover top, (6) Door assembly, (7) Display with mounted circuit board (8) High voltage block assembly (9) Lamp, (10) Accessories 1 [(11) Magnetron (12) Mechanical Timer (b) Car Cassette/Compact Disc Player (1) Screw sets (2) Transformer (3) Speaker with box (4) Cable with connector 1 [(5)Accessories (6) Braket (7) Rear cover assy (8) Remote control (9) Main frame or chassis with top cover (10) Nobs and buttons (11) Front panel assy with mounted circuit board (12) Mechanism assy with motor and head] ( c ) Hi Fi System (1) Screw sets (2) Transformer (3) Speaker with box (4) Cable with connector (5) Accessories (6) Braket (7) Rear cover assy (8) Remote control (9) Main frame or chassis with top cover (10) Nobs and buttons (11) Front panel assy with mounted circuit board (12) Mechanism assy with motor and head (d) Stereo Cassette/Stereo Car Cassette Player (1) Screw sets (2) Transformer (3) Speaker with box (4) Cable with connector 1 [(5) Accessories (6) Braket (7) Rear cover assy (8) Remote control (9) Main frame or chassis with top cover (10) Nobs and buttons (11) Front panel assy with mounted circuit board (12) Mechanism assy with motor and head] (e) Radio Cassette Player (1) Screw sets (2) Transformer (3) Speaker with box (4) Cable with connector 1 [(5) Accessories (6) Braket (7) Rear cover assy (8) Remote control (9) Main frame or chassis with top cover (10) Nobs and buttons (11) Front panel assy with mounted circuit board (12) Mechanism assy with motor and head] (f) Pocket Size Cassette Player (1) Screw sets (2) Transformer (3) Speaker with box (4) Cable with connector 1 [(5) Accessories (6) Braket (7) Rear cover assy (8) Main frame or chassis with top cover (9) Nobs and buttons (10) Front panel assy with mounted circuit board (11) Mechanism assy with motor and head] (g) D.V.D / V.C.D Player 1 [(1) Screw sets (2) Transformer (3) MPEG card (4) Metal case (5) Loader (6) Panel with PCB & Card (7) Power board (8) Remote control (9)Inner connector (10) Outside connector (AC, AV, RF cable).] (h) Plasma Display Panel / Liquid Crystal Display : (1) Screw sets (2) Speaker (3) Front cabinet assy. (4) Filter or plasma display panel protector (5) Rear cover assy. (6) Plasma display control unit (7) Printed circuit board (8) Plasma display panel (9) AC cable accessories (i) Car Audio System (1) Remote control (2) DC cord (3) Housing (4) Top plate (5) Chassis (bottom plate) (6) Cassette mechanism assy. (7) Front sub-panel (8) Front panel assy. (9) Front panel cover (10) Insulating sheet (11) Heat sink (12) Heat sink spacer (13) Misc. Hardware (14) PC board | Respective headings 7318.1400 8516.9000 8504.5000 8516.5000 8516.5000 8516.5000 8516.5000 8516.5000 8539.2200 8516.5000 8540.7100 9106.9000] 7318.1400 8504.3100 8518.2200 8544.5100 8529.9090 8529.9090 8529.9090 8529.9010 8529.9090 8529.9090 8529.9090 8529.9090 7318.1400 8504.3100 8518.2200 8544.5100 8529.9090 8529.9090 8529.9090 8529.9010 8529.9090 8529.9090 8529.9090 8529.9090 7318.1400 8504.3100 8518.2200 8544.5100 8522.9000 8522.9000 8522.9000 8522.9000 8522.9000 8522.9000 8522.9000 8522.9000 7318.1400 8504.3100 8518.2200 8544.5100 8529.9090 8529.9090 8529.9090 8529.9010 8529.9090 8529.9090 8529.9090 8529.9090 7318.1400 8504.3100 8518.2200 8544.5100 8522.9000 8522.9000 8522.9000 8522.9000 8522.9000 8522.9000 8522.9000 7318.1400 8504.3100 8522.9000 8522.9000 8522.9000 8522.9000 8522.9000 8522.9000 8536.9090 8536.9090 7318.1400 8518.2200 8529.9090 8529.9090 8529.9090 8529.9090 8534.0000 8529.9090 8544.5100 8529.9010 8529.9090 8529.9090 8529.9090 8529.9090 8529.9090 8529.9090 8529.9090 8529.9090 8529.9090 8529.9090 8529.9090 8529.9090 8534.0000 | 5% ad val. 10% ad val. | As recommended by the Engineering Development Board (EDB) Nil 69 | Mobile phones Payphones WLL phones CDMA phones GSM phones | A) CKD kits for assembly of mobile phones, B) Following CKD Kits for assembly of Payphones, WLL phones, CDMA phones & GSM phone s (1) Buzzer (2) Bobbin (3) Choke (4) Clamp (5) Core 1 [(6) omitted (7) omitted (8) omitted] (9) Cardreader (10) Connector (11)Diac (12) Capacitor (13) Switch (14) Fuse (15) Fuse holder (16) Relay (17) Transducers (18) Trimpot (19) TVS (20) VDR (21) LCD display character (22) LCD display graphic 1 [(23) omitted] (24) Antenna indoor (25) omitted (26) CDMA module (27) GSM module (28) WLL module (29) Nut (30) Screw 1 [(31) omitted (32) omitted (33) omitted (34) omitted] (35) Sealed lead acid batteries (36) Nickle metal hydride batteries (37) AC-DC adopters (38) 1 [omitted] 1 [(39) Discreet components for module] (40) Coaxial cable | 8525.2010 8531:8000 8529.9090 8536:9090 8536:9090 8536:9090 omitted omitted omitted 8529:9090 8536:9090 8529:9090 8532:2900 8536:3090 8535:1000 8535:9000 8535:9000 8529:9090 8529:9090 8529:9090 8529:9090 8529:9090 8534:0000 omitted 8529:9090 omitted 8529:9090 8529:9090 7318:1900 7318:1590 3926:9099 omitted omitted omitted omitted 8507:2000 8507:8000 8504:5000 omitted 8529:9090 8544:4990 | 0% ad val. 5% ad val | If imported by local assemblers/ manufacturers duly approved by the Government of Pakistan. 70 | Viscose staple fiber | Raw material Cotton linter | 1404.2000 | 0% ad val | Nil 71 | Water and waste water treatment (purifying / filtering ) plants, coal firing systems, gas processing plants and oil & gas field prospecting | Raw materials, sub-components, components, sub-assemblies and assemblies, | Respective headings | 0 % ad val. | As recommended by the Engineering Development Board (EDB) 72 | Welded Steel Pipes | Raw materials/sub-component/component (1) Hot rolled steel coils/strips (2) Coated electrodes of base metal (3) Coated rods and cord wire 1 [(4) omitted] (5) Copolymer adhesive 1 [(6) Welding flux (7) Welding wire] | 7208.1090 8311.1000 8311.3000 omitted 3910.0000 3810.9000 7217.9000 | 5% ad val | All consumables not manufactured locally shall be included in raw materials 73 | Wire rope, Wire (High Tensile ), High Carbon and prestressed concrete wire/ strands, Core wire for ACSR spring wires. | Raw materials High carbon (high tensile) steel wire rod/ Alloy steel wire rod. | 1 [ 7213.9190 7213.9990] | 5% ad val. | Nil 74 | Sugar mills up to 10,000 tcd capacity per unit. Cement plants up to 4,000 tpd capacity per unit. Certain Types of chemical plants for the production of industrial chemicals. Thermal power plants up to 350 MW capacity per unit. Hydel Power plants up to 50 MW capacity per unit. Certain types of Oil and Gas development plants. Textile machinery Any other project approved by the Economic Co-ordination Committee of the Cabinet. | Raw materials, sub-components, components, sub-assemblies, assemblies and other items of machinery. | Respective headings | 0 % ad val | Provided the rates of duty applicable to equipment and machinery when imported as part of a complete industrial plant is 10% or less even under any other concessionary Notification. Where such duty is higher than 10% then the exemption in customs duty shall be limited to a maximum of 10%. Further, the manufacturer is recognized prime manufacturer-cum-supplier of such plants, and has suitable in -house facilities for design, engineering and progressive manufacture of such units or plants. 75 | Any other project or industry approved by Indigenization Committee of Engineering Development Board having members from the Ministry of Industries and Production and Central Board of Revenue. | Raw materials, Sub-components and components, Modules and assemblies. | Respective headings | 5% ad val. 10% ad val. 15% ad val. | As specified by the Engineering Development Board or Central Board of Revenue. 76 | Cold rolled coils (CRC) or G.I sheet / coils | Raw materials Hot rolled coils / sheets in prime quality. Zinc oxides. Chromium oxides. | 72.08 28.17 28.19 | 0% ad val. 0% ad val. 0% ad val. | If imported by sales tax registered manufacturers of CRC / G.I sheets or coils. 2 [77. | Milk Chillers of les than 3000 liter capacity | Parts and components | Respective headings | 0% ad val. | If imported by local manufacturers duly recognized by EDB giving input- output ratios.] 1 [77A. | Phthalic anhydride | o-xylene | 2902.4100 | 0% ad val. | For one year only. 77B. | Agriculture diesel engines (single cylinder of 12-32 HP) | CKD kit | 10% ad val. | Nil (1) Balancing block | 8409.9990 (2) Camshaft | 8483.1090 (3) Connecting rod assy | 8409.9990 (4) Connecting rod bearing set | 8483.3010 (5) Cover sets | 8409.9990 (6) Crank shaft | 8483.1090 (7) Cylinder block | 8409.9990 (8) Cylinder head | 8409.9990 (9) Cylinder head cover | 8409.9990 (10) Cylinder liner (of 18-32 HP) | 8409.9990 (11) Fly-weight assy | 8409.9990 (12) Fuel Injection pump | 8413.3090 (13)Fuel injector | 8413.3090 (14) Gear sets | 8483.4090 (15) Intake/exhaust valve & spring | 8409.9990 (16) Main bearing set | 8483.3010 (17) Oil pump | 8413.8190 (18) Piston (of 18-32 HP) | 8409.9990 (19) Piston ring set (of 18-32 HP) | 8409.9990 (20) Set of bushing | 8483.3010 (21) Valve rocker arm assy | 8409.9990 (22) Water pump | 8413.8190 77C. | Arms and Ammunitions | Raw materials Sub-components & Components | Respective headings | 0% ad val. 5% ad val. | If imported by local manufacturers duly recognized or recommended by EDB giving input-output ratios. 77D. | Zippers | Raw material Brass flat wire | 7408.2100 | 15% ad val. | Nil 77E. | Polyester or synthetic fibre | Raw material Diethylene Glycol (DEG) | 2909.4100 | 0% ad val. | Nil 77F. | Food Processing Industry | Folding carton Aluminum foil | 4819.2000 7607.2000 | 15% ad val. 10% ad val. | Nil 77G. | Aluminum Foil | Raw material Aluminum sheet | 7606.1200 | 5% ad val. | Nil] FORM (To be filled in by the importer or any person or persons duly authorized by him form his organization) Name & address of the Importer | NTN/FTN Port of clearance | Clearing Agents Name/No. S.No. | H.S. Code | Description | Specifications of imported inputs | Applicable rate of duty | Quantity | Unit value | Unit of measure | Total value in Pak Rupees (1) | (2) | (3) | (4) | (5) | (6) | (7) | (8) | (9) CERTIFICATE. It is certified that the description and quantity mentioned above are commensurate with the inputs requirement and that the same are not manufactured locally. It is further certified that the above items shall not be used for any other purpose. Signature ______________________ Name ______________________ N.I.C. No. ______________________ FORM (To be filled in by the Collector of Sales Tax Collectorate) Header information NTN/FTN of importer | Name of importer | Approval No. (1) | (2) | (3) Details of input goods (to be filled by the authorized officer of the Regulatory Authority) | Goods imported (Collectorate of import) HS code | Description | Specs | Applicable Customs Duty rate | Quantity | UOM | Quantity imported | Collectorate | CRN/ Mach. No.. | Date of CRN/ Mach. No. (4) | (5) | (6) | (7) | (8) | (9) | (10) | (11) | (12) | (13) It is certified that the description and quantity mentioned above are commensurate with the input requirement, and that the same are not manufactured locally. Signature ------------------------------------------------- Name ------------------------------------------------- Stamp ------------------------------------------------- Note:- In case of clearance through Pakistan Customs Computerized System (PACCS), the above information shall be furnished on line against a specific user I.D. and password obtained under section 155D of the Customs Act, 1969. __ [C.No.1(6)Survey-I/2005-Pt] (MUHAMMAD RAMZAN) Additional Secretary As amended: 1. S.R.O.780(I)/2005 dated 06.08.2005 2. S.R.O.1018(I)/2005 dated 29.09.2005